Search results

Search the forum Search Articles
  1. F

    .308 load for a Remington 700

    Varget, RL15 and IMR 4064 are my go to powders in 308W. Do a ladder test to get best results.
  2. F

    what .243 powder?

    H4350 Win Brass Fed 210M Do a ladder test for your rifle for best load results.
  3. F

    Gunsmithing Does anyone stock Stiller Actions?

    http://bugholes.com/index.php?route=product/category&path=88_97_98 This guy does, But just like everything else he is out of stock. Sorry I can't help more.
  4. F

    260 Loads Only

    Re: 260 Loads Only My load and seems to be close to everybodys sweet spot. Krieger 25" 142 SMK .005 from Lands Norma Brass H4350 at 42.8gr Fed210M 2815FPS
  5. F

    260 speed issue

    Re: 260 speed issue My load and seems to be close to everybodys sweet spot. Krieger 25" 142 SMK .005 from Lands Norma Brass H4350 at 42.8gr Fed210M 2815FPS
  6. F

    Varget w/ 178's and H1000 w/208's. Ladders and Q's

    Re: Varget w/ 178's and H1000 w/208's. Ladders and Q's Did you see pressure sighns at 76.5. Load data on Hodgdons says you can go to 78gr. My Node with 208 Amax was at 77.5gr. I went to 78.5 with no presssure. I was happy at 2900fps so I stopped. You are on the right track. If are happy at...
  7. F

    Ladder results

    Re: Ladder results I agree with Rover31. I do mine at 450 or 500 yards. But load in between 6 and 7 look like it might be a Node with the way your MV and target look. I call a redo. Do the test a couple times just to see if it repeats same data.
  8. F

    What moa base for 300wm 1000yd & vortex pst?

    Re: What moa base for 300wm 1000yd & vortex pst? Liberty optics has 30moa Seekins base for $109. I like the bases and rings. He is out of stock as of now on 20moa so I told him to change my order to the 30moa. I wanted it for my 260rem but will now put the 30moa to my 300wm and use the 20moa...
  9. F

    What moa base for 300wm 1000yd & vortex pst?

    Re: What moa base for 300wm 1000yd & vortex pst? You may not need a canted base to get to a 1000. But 20moa will get you past 1000 for sure.
  10. F

    sierra 220smk 240smk bullet length?

    Re: sierra 220smk 240smk bullet length? http://www.jbmballistics.com/ballistics/lengths/lengths.shtml Here ya go
  11. F

    Your thoughts on my ladder test results?

    Re: Your thoughts on my ladder test results? On your color coding, use white butcher paper or buy a roll of blue print paper. I do this all the time. Works GREAT! I shoot 3 or 4 rounds and go mark the target with the color and charge so there is no confusion. I use colored sharpies. Some...
  12. F

    My first Krylon'd AR15

    Re: My first Krylon'd AR15 How did you do the numbers on the scope?
  13. F

    Photos JC Steel Targets

    Re: JC Steel Targets I bet it's Duke Energy and hopefully that is steam and not smoke. :-)
  14. F

    rifle for deer hunting in indiana

    Re: rifle for deer hunting in indiana Look an Aj Brown for a 358 Hoosier. This is what you are looking for.
  15. F

    Gunsmithing suppressor cerakote

    Re: suppressor cerakote Don't meant to hijack. Does the coating hold the heat in?
  16. F

    Sidearms & Scatterguns reshparpen knifes as good as new?

    Re: reshparpen knifes as good as new? I use a 1" x 30" belt grinder. I start with 320 grit them 600 finish worth a surgi sharp strop belt with rouge. I can get a abused, good steel knife shaving hair in 3 minutes. Its just not something you can throw in you pack to take with you. I do have a...
  17. F

    Gunsmithing Any recommendations for a gun vise?

    Re: Any recommendations for a gun vise? This is what I use. Seen them around for less than $40 Its not as bulky as the Tipton. http://www.mtmcase-gard.com/products/shooting/rifle-maintenance-center-rmc-1.php
  18. F

    EDM XM408 Sight In Results...

    Re: .408 Cheytac Sight In Results... That's the cool shit I want to see in the Beyond a 1000 yards. Thanks for sharing.
  19. F

    EDM XM408 Sight In Results...

    Re: .408 Cheytac Sight In Results... Why would you hurt my feelings? I never brought my feelings here. I totally agree. More to homeland security as I posted before. This has turned into something that has nothing to do with the service, homeland security, or mercenary. Its just I would like...
  20. F

    precision rifles... show em

    Re: precision rifles... show em dpreston Why are the bolts removed?
Top Bottom
Back
Home
Forums
Merch
Alerts