Search results

Search the forum Search Articles
  1. ShtrRdy

    Testing various powders: barrel cleaning, fouling or...

    Wow, good to know! I hadn't tried that combination yet. 🤪
  2. ShtrRdy

    SOLD MPA ESR R700 SA w/ Extended NV Bridge & Competition Rails

    PM sent
  3. ShtrRdy

    Testing various powders: barrel cleaning, fouling or...

    That's a good question. From my limited experience, I think that firing a few rounds of the next powder seems to settle the barrel if there is going to be a change.
  4. ShtrRdy

    Negatives of swapping barrels?

    The only downside I see, (and I do this on one rifle), is you have to near-zero and reset the turrets each time.
  5. ShtrRdy

    Pre-fit barrel alignment

    Oh, man!! Please let us know if the Burris comes back magically healed.
  6. ShtrRdy

    New Jug Syndrome

    A couple things to consider with a new jug of powder. If the new jug is a different lot number it likely will have a slightly different burn rate. If where you live is considered a dryer climate, your old jug of powder will have dried out some which causes higher velocity. Then when you...
  7. ShtrRdy

    Trigger hanger adjustment vs. sear engagement: Which one first?

    I don't know if there is a preferred procedure but I can offer the following. There are two Sear in a trigger assembly. The internal sear and the upper sear. If you adjust the trigger pull weight to its lowest setting you may need to adjust the inner sear engagement. The upper Sear contacts...
  8. ShtrRdy

    Help improving my group’s. What needs changing?

    What's wrong with the 2.281 and 2.285?
  9. ShtrRdy

    Exactly how important is case trimming?

    It's more of a safety issue.
  10. ShtrRdy

    Re-chamber resource, front range Colorado.

    I haven't used this guy yet but he shoots benchrest competitions so he might be good at chambering a barrel. He's located near Loveland. https://s3gunsmithing.com/
  11. ShtrRdy

    Anyone use Silica Gel Packets-Desiccant Packs to keep moisture out of powder?

    Powder needs some amount of moisture in order to get the correct burn rate. I use humidity control packs to maintain the humidity. I use the 49% packets https://bovedainc.com/
  12. ShtrRdy

    Accessories Work FR pants brand new

    I would have the same problem with you for fit. Good luck with the sale.
  13. ShtrRdy

    Touching the lands at spec OAL

    Not a problem. Carry on.
  14. ShtrRdy

    6.5 Creed build - Impact 737r, pre-fit mfg, profile?

    I have an Impact 737R action and it looks to me like the striker/firing-pin is pulled back 100% on bolt open.
  15. ShtrRdy

    6.5 Creed build - Impact 737r, pre-fit mfg, profile?

    Would you mind explaining how the Impact is a 50/50 cock on open?
  16. ShtrRdy

    Target interpretation help.

    I agree with your thoughts. Also, 43.6 to 44.2 seem to have a similar point of impact. It this a 308 Win?
  17. ShtrRdy

    ES of 97?

    I sometimes put cartridges in my pants pocket to keep them warm. Maybe I'll try your suggestion next time. Should get some looks from other shooters. 😄😂🤣
  18. ShtrRdy

    Reloading Help Needed

    How many rounds fired make up each SD and ES?
  19. ShtrRdy

    ES of 97?

    Virgin brass could be the problem in a couple different ways. The dimensions on new brass typically do not match your chamber and resizing die. The other thing is new, clean, brass neck and bullet can form a welding action to where the bullet is stuck to the brass .
  20. ShtrRdy

    SOLD MPA Matrix Pro. @AN260rem

    PM sent. Thanks for the nice pictures.
Top Bottom
Back
Home
Forums
Merch
Alerts