Search results

Search the forum Search Articles
  1. D

    WTC Solid Bullets--questions from a neophyte

    1. You do not need a custom chamber. In fact, most will run a SAAMI spec chambers. They do not require a lot of free bore. Thus, chambers throated for extremely long jacketed bullets are the ones that will give you problems, if any. This would be due to excessive jump requirements. Just...
  2. D

    37XC build

    My point was that it seemed like you were fire forming with the loads conveyed. If you have previously fire formed the cases, then it should have no bearing on the situation unless the brass 8s too thin. Lets stick with the original plan and see what your groove measures before reading...
  3. D

    37XC build

    Did you really mean to say that your chamber, ie head space, is 0.030" long? If that's true, you're asking way too much without fire forming first. If this is true, then it certainly explains your pressure issues.
  4. D

    The "perks" of loading for your buddies!

    And how many have you hydraulically dented because of improper application? Its not that it wont work in most cases, but when improperly applied, problems occur. And in some situations, like the one we have here, the wax simply does yield enough lubricity.
  5. D

    What muzzle brake are you guys liking for .375?

    Indeed.
  6. D

    What muzzle brake are you guys liking for .375?

    MOAB. Directs blast away from and around the shooter. Doesn't pick up and cover the gun or shooter with ground debris. Recoil reduction is maximised and bullet flight is undisturbed. And it is 'self timing'.
  7. D

    World's Longest Shot 'Quit Your Bitchin' ELR match

    We'd like to congratulate all the winners at the World's Longest Shot Challenge 'Quit Your Bitchin' ELR match this past weekend. We'd also like to recognize the accomplishments that we were able to contribute to: Winner of the 375 Class: David Mann...
    • Thread
  8. D

    Flatline 6mm Bullet

    This is one of the best places to announce our new bullet. 6mm 88.6 grain rocket: https://warner-tool.com/collections/flat-line-projectiles/products/flatline-6mm-88gr
    • Thread
  9. D

    198g flatline

    It will be the same for both and it will be at the top end of the driving band. That is where the .308 diameter ends. Everything else in front of that is smaller with the pilot band being a .302 diameter. Thst point is about. 510 from the base of the bullet.
  10. D

    375 SnipeTAC and 400 Flatlines

    I think you'll find that N570 is a bit fast for the 400. If you send me an email to [email protected] I will send you a starting load chart with a variety of powder options. Please include your barrel length and case capacity in water weight in grains.
  11. D

    198 Flatlines in 300win mag

    Our test results aside, based on their winning record at distances shot beyond supersonic flight, it is safe to say that they transition just fine. When we tested the Tubb ring addition, we found that they transition even better than what we originally expected. That translates to the mean that...
  12. D

    Adjustable bases?

    Holding out? No, taking our time to develop it properly. Gixxer- please explain to me how raising your scope above the bore, if done with precision, is a bad thing. Further, please explain to me how hanging anything with weight to it on the ftont of expensive optics is good for said optics...
  13. D

    Adjustable bases?

    Better pictures to follow shortly.
  14. D

    375 Mercenary , the beast unleashed !

    We can certainly do make dies for the Merc. We've made a couple of sets already. warner-tool.com/reloading-dies/
  15. D

    Black Friday - Cyber Monday @ Warner Tool Company

    Black Friday / cyber Monday may ne over, but we are still offering free shipping for the month of December!
  16. D

    An idea for ballistic calibration

    Your going to need something a little more sophisticated than a Labradar to 'see' the bullet for 2 miles.
  17. D

    Black Friday - Cyber Monday @ Warner Tool Company

    Take 15% off all Flatline projectiles and enjoy free shipping too! https://www.warner-tool.com/flat-line-projectiles/
  18. D

    WTB Carbon Fiber Tripod w/ Hog saddle

    Pm sent.
  19. D

    WTB Carbon Fiber Tripod w/ Hog saddle

    Looking for something decent, what have you got?
  20. D

    Range Report Warner Tool Flat Line Projectile 122gr 6.5 Variant

    I'd be happy to discuss the inclusion of the Flatlines with the QL folks, but they seemed uninterested last time i spoke to them. I do not share bullet files with individuals. The reason is that QL over estimates pressure and under estimates velocity unless weighing factor and initial start...
Top Bottom
Back
Home
Forums
Merch
Alerts