Search results

Search the forum Search Articles
  1. JRodMT

    Building the Perfect Reloading Room

    I’ve actually built quite a lot of my own furniture and always gathering ideas.
  2. JRodMT

    Building the Perfect Reloading Room

    Thank you. It’s an all welded steel frame, despite the look of the faux copper riveted gusseted corners. I used .120” x 1.25” angle w/ .080”x2x2 steel legs. In the corner area of the vise, I welded a steel plate for added support of the vise so I didn’t have to run such a thick wood top as most...
  3. JRodMT

    Building the Perfect Reloading Room

    I just recently finished my new bench.
  4. JRodMT

    Let’s see that reloading bench

    I just finished building my new one. It’s compact but has a fair amount of storage. It took me a year after getting into my house to get around to building a nice bench. I think eventually I’ll build another just for prep. I just thought that a nice bench would make all of the hours behind it...
  5. JRodMT

    Slow/Cool powder for 6mm Creed with 115 DTACs?

    Well, thank you, if that’s the case. I could probably help you out with your use of commas. It changes your post, my friend.
  6. JRodMT

    Slow/Cool powder for 6mm Creed with 115 DTACs?

    Ok. Fair enough. I’ll bite. For the sake of trying to help others, I gave my experiences. If my measuring method is flawed, so be it. So let’s triple it, if that suits your experiences. The point being made is that the erosion is considerably less than H4350. If we are measuring knowledge by...
  7. JRodMT

    Slow/Cool powder for 6mm Creed with 115 DTACs?

    Well, see there. You didn’t even have to try and yet you succeeded.
  8. JRodMT

    Slow/Cool powder for 6mm Creed with 115 DTACs?

    So I was the original poster of the velocity ladder test that was posted earlier. Since then I’ve gained more experience with this load. I’ve got 1200 rounds now down my 7.5t 28” Bartlein 6 Creedmoor. As one poster stated previously, I believe that the benefits to running H4831sc are...
  9. JRodMT

    SARACEN bag from WARHORSE DEVELOPMENT

    Great bags and great people. It’s my go-to for most everything.
  10. JRodMT

    ++Bighorn TL3 Builds++

    It’s officially finished now in 6mm Creedmoor.
  11. JRodMT

    6.5mm Creedmoor & 6mm Creedmoor

    Mine is really liking H4831sc. I threw some IMR4451 at it too and that also looked promising.
  12. JRodMT

    RCBS Chargemaster Issue

    You can also adjust dispensing speeds on the Chargemaster as well.
  13. JRodMT

    **6 Creedmoor**

    Throughout my load development process, my barrel is speeding up but it’s still shooting great. I’m running 43.5gr H4831sc at 3100. I’ve got 100rds down the tube now. Here’s a 300yd group.
  14. JRodMT

    **6 Creedmoor**

    Small world isn’t it?! I borrowed my user name from SnoWest. Thanks for coming over and re-introducing yourself. Hope to see you at more matches.
  15. JRodMT

    **6 Creedmoor**

    I just ran up a velocity ladder test to see what this rifle was capable of running H4831sc. I’ve got a 28” Bartlein 7.5 twist and here are my results with 110 SMKs and Peterson brass. Slight pressure signs as 45gr. 42gr- 2940fps 42.3gr- 2953fps 42.6gr- 2968fps 42.9gr- 3018fps 43.2gr-...
  16. JRodMT

    6.5 Super LR and 260 Improved Variants

    I’m running a 6.5 LRP (longer neck/35 degree shoulder) My load is: Lapua Brass (Reamed and turned) 210M primers 140 Berger Hybrids 44.7gr H4350 COAL 2.955” 2920fps
  17. JRodMT

    **6 Creedmoor**

    A while back you said you were messing with H4831sc. How did that work out for you?
  18. JRodMT

    ++Bighorn TL3 Builds++

    Everything dropped in almost perfect. The only thing I would change is I wish they had inletted the bolt handle slot another .0125” down. It is very close if not touching when you slam the bolt down. I’m running a Huber 2-stage trigger. I love the set up, especially when shooting it off the...
  19. JRodMT

    ++Bighorn TL3 Builds++

    TL3 in a Manners PRS-1 and a TL3 in an XLR Envy chassis
  20. JRodMT

    Huber trigger and Bighorn action

    Running a Huber on my TL3. I love it. Putting one on my next build as well. No problems
Top Bottom
Back
Home
Forums
Merch
Alerts