Search results

Search the forum Search Articles
  1. F

    Accurate Mag Scratching Brass

    Thanks again everyone for the replies. I ended up getting some polishing wheels on my dremel and polished up the lips after the initial sanding. Now all I get on the brass are surface scratches that if you twist the case in some fine steel wool dissapear so im guessing it shouldn't cause any...
  2. 260 AI, 142 SMK.jpg

    260 AI, 142 SMK.jpg

    • fullbore
    • Media item
    • Comments: 0
    • Album: KRG Bravo U300
  3. 260 AI, 130 ELD M Test.jpg

    260 AI, 130 ELD M Test.jpg

    • fullbore
    • Media item
    • Comments: 0
    • Album: KRG Bravo U300
  4. 142 Sierra, 48gr 2213SC,.jpg

    142 Sierra, 48gr 2213SC,.jpg

    F Class Target
    • fullbore
    • Media item
    • Comments: 0
    • Album: KRG Bravo U300
  5. F

    Accurate Mag Scratching Brass

    Just a quick update on this, Have any of you here adjusted the feed lips much to help with how smooth it cycles rounds? Because Im running a 260 AI that has minimal case taper would It be a good idea for me move the forward section of feed lips out abit so the forward section of the round isnt...
  6. F

    Accurate Mag Scratching Brass

    No I havent touched the feed lips at all apart from some sanding today. Using 240 Grit paper at the moment, will try and get ahold of some finer grit/emery paper tomorrow and try and get it really smooth and hopefully no more nasty scratches on my brass. Thanks to everyone who has posted, have...
  7. F

    Accurate Mag Scratching Brass

    Could you get it to a stage where it would no longer mark the brass?
  8. F

    Accurate Mag Scratching Brass

    Sounds good, picked up a new Dremel yesterday actually so a good first project for it. Have you used a Accurate Mag before? Is it possible to get it to a stage where it will leave zero marks on brass?
  9. F

    Accurate Mag Scratching Brass

    Would you use a fine file or something? Ive also got 120 and 240 Grit sandpaper too.
  10. F

    Accurate Mag Scratching Brass

    Evening Gents Any of you on here who use the AICS Accurate Mags notice it scratches the absolute hell out of your brass? Im using Lapua 260 brass in my 260 AI and just wondering if anyone out there knows of a remedy to stop them big nasty scratches. Thanks for your time
  11. F

    Recoil Management With Ski Feet Bipod (Phoenix Bipod)

    Thanks very much for those replies, will try and work on my body alignment. I usually stand behind my rifle and line up the butt of the stock to just inside my right knee. Then from there kneel down and then shoulder the rifle so everything is square to the target. I can't really load the bipod...
  12. F

    Recoil Management With Ski Feet Bipod (Phoenix Bipod)

    Hello Everyone Ive been shooting a 260 AI for a month or so and Im ejoying it very much. But the one thing that is still a little off is how the gun reacts under recoil. I use a Rabbit ear style SEB Bigfoot F class rear bag as Ive been mostly shooting F class at my local range with it. Im...
  13. F

    260 AI Load Development

    Thanks mate Ill run another test with those charges and then from there Ill start to tinker with seating depths.
  14. F

    260 AI Load Development

    Gday Everyone Just done a OCW test at 100 yards for my newly build 260 AI. Details are: 142 Sierra Match King, 0.010" Jump Lapua Brass (fireformed) Fed 210M Primers H4831SC (2213SC in Aus) Personally I feel I messed up 48gr group with a bad trigger press even before seeing the chrony numbers...
  15. U300 Feeding.mp4

    U300 Feeding.mp4

    • fullbore
    • Media item
    • Comments: 0
    • Album: KRG Bravo U300
  16. F

    Gunsmithing 260 AICS (Accurate Mag) Feeding Issues

    Thanks everyone for the advice l, greatly appreciated. I ended up taking out the action and re installed everything and found I hadnt quite got everything in straight and flush. It now feeds 5 rounds well. Will try and upload a video.
  17. F

    Gunsmithing 260 AICS (Accurate Mag) Feeding Issues

    Thanks for the advice mate, was thinking of just opening up the front of the feed lips little by little to see if that helps push the bullet tip up into the chamber and not into the bottom of the barrel.
  18. F

    Gunsmithing 260 AICS (Accurate Mag) Feeding Issues

    Yes your correct there is an adjustment with the trigger guard screw that you can fine tune to have a tight magazine well or have it so that the magazine drops out under gravity when you hit the mag latch
  19. F

    Gunsmithing 260 AICS (Accurate Mag) Feeding Issues

    I have not tested a regular AICS mag. A MDT plastic magazine feeds like butter. Yes its a Ultimatum U300 action in a KRG Bravo stock
  20. F

    Gunsmithing 260 AICS (Accurate Mag) Feeding Issues

    Hello everyone Im having trouble getting my 260 to feed out of my Accurate Mag 5 shot magazine. I have the magazine with no blinder plate to allow a max COAL of 2.950". The problem im having is the round isnt running up the feed ramp properly and is just slamming into the bottom barrel face...
Top Bottom
Back
Home
Forums
Merch
Alerts