Search results

Search the forum Search Articles
  1. ruebarb

    Ruger warranty test procedure

    So I've tried a bunch of COLs, i only had one group that possibly could be a lead that was less than 2 MOA. The factory col with 82.5 gr H4350 with the hornady 270gr SP has produced 1.25- just under 2 MOA. This appears to be the best this rifle can shoot with that powder and bullet. There are...
  2. ruebarb

    Dillon will finance your purchase for only a "small" fee

    Most likely it is Progressive Leasing, they've been running this scam for years, they don't release any details until you make them and basically pay 100% interest. They get around Usury interest laws by making it a Lease.
  3. ruebarb

    Ruger warranty test procedure

    Old thread, but I have the same rifle, with accruacy nodes around H4350 80.5 & 82.5 (Hornady SP 270gr) , factory COL, the best groups I can get are 2 MOA. I'm going to try playing with the COl next, bench rest shooting this rifle is Brutal!!! I feel like i'm in taekwondo again. I've shot over...
  4. ruebarb

    AMP Annealing Made Perfect is a load of horse manure?

    Welcome to July 2018. Explains some of the reasons for the variation in Aztec codes. The entire 5 part series is very informative. https://www.ampannealing.com/articles/46/annealing-under-the-microscope/ 1. What is responsible for AZTEC analysis generating different annealing codes...
  5. ruebarb

    Precision Rifles.....show em!!

    Incase you are looking for smaller cheek rest knobs, I swapped mine for these. https://smile.amazon.com/gp/product/B0081D1YGC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  6. ruebarb

    Lapua 6.5 Credmoor

    His question was base on using a "modified full length die". Depending on how "modified" the die is, the shoulder may still be pushed way back to get the base to move. Annealing would only aid in preventing premature failure, as the brass is already work hardened at 5-6 firings. Plus thier is...
  7. ruebarb

    Lapua 6.5 Credmoor

    I would anneal the brass, it will take the stress out of the brass, then resize back to spec
  8. ruebarb

    Rifle Scopes **Update** How much chromatic aberration is accceptable in a Steiner T5Xi?

    I had one for a few days, after I mounted it, the reticle was way off, back it went to Optics Planet. I bought a Primary arms platinum 6-30 instead, no regrets
  9. ruebarb

    3D Printing for Reloading

    That is what I did, got a MK3 and started learing autofusion 360, bit of a tough learning curve at 1st, but gets easier. I recommend buying the kit, so you understand how it all goes together, plan on 2 days for the assembly. Instructions are excellent. Takes time to truly understand everything...
  10. ruebarb

    3D Printing for Reloading

    You are correct, marked with a sharpie, they were 9×18mm Makarov
  11. ruebarb

    3D Printing for Reloading

    Are you asking about the brass cases in the blue bin? or one of the 3d prints?
  12. ruebarb

    Dillon Reloading Accessories, thoughts?

    More info on the Toolhead Stands can be found here. https://www.northeastshooters.com/xen/threads/dillon-reloading-accessories.373562/ I can make this with the stand or flat, thoughts? Other Ideas? Also been suggested...
    • Thread
  13. ruebarb

    Dillon Reloading Accessories, thoughts?

  14. ruebarb

    3D Printing for Reloading

    There is a project for the DIY Bullet Feeder, I made one of them and also contributed to the project. There is alot of print time and some fitting on the design. https://www.thingiverse.com/thing:2504314
  15. ruebarb

    3D Printing for Reloading

    Here are a few more I've done, interchangeable posts for 550/650/1050/SDB/Powder Measure
  16. ruebarb

    Dillon Reloading Accessories, thoughts?

    I can now move onto working on the other designs.
  17. ruebarb

    Dillon Reloading Accessories, thoughts?

    More info on the Toolhead Stands can be found here. https://www.northeastshooters.com/xen/threads/dillon-reloading-accessories.373562/
  18. ruebarb

    Dillon Reloading Accessories, thoughts?

    Designing is done, working on a "Dillon" color PLA/PETG that doesn't suck to print with. It is amazing how many poor PLA & PETG fiilaments are out there, more are crap than good. Not alot of options with that color, hoping I can find one that prints well and consistently. Otherwise it might be...
  19. ruebarb

    Dillon Reloading Accessories, thoughts?

    Interesting, I run H4350 all the time, never seen this bridging. Used cheap funnels, my own 3DP and the dillon funnel.
  20. ruebarb

    Dillon Reloading Accessories, thoughts?

    What do you mean by bridging?
Top Bottom
Back
Home
Forums
Merch
Alerts