Search results

Search the forum Search Articles
  1. Z

    Accessories Proof .223 Defiance Ruckus Barrel (Price Drop)

    Sad I missed this. I will take it if Hankcrm passes. ZY
  2. Z

    Garmin Xero C1 Pro chronograph

    No issues on our public range. A low overhead baffle system made LR have fits if it was not aimed within about 1 degree. Xero had zero issues with baffle or adjacent shooters.
  3. Z

    First time shooting at this type of target, need help properly scoring.

    What does “plug” mean?
  4. Z

    Is there a muzzle device that does not affect accuracy? I just want to extend my barrel a couple of inches.

    Nobody remembers bloop tubes? Very common on 22s to extend sight radius for open sights and even tune the barrel. Google it, plenty of info (and products) out there. ZY
  5. Z

    Garmin Xero C1 Pro chronograph

    A nice feature is you can edit the name of the shot string in the app up to 60 characters. Can add some load data, gun info, DA etc. “Deviant 105 hyb, 29.4 H4895, -0.024, 3200rds, temp78, DA1024” ZY
  6. Z

    Garmin Xero C1 Pro chronograph

    I am a little surprised the C1 does all this with 820 Mah, 3.7v….for 6 hrs.
  7. Z

    Garmin Xero C1 Pro chronograph

    Ordered about 9 AM east coast....
  8. Z

    Garmin Xero C1 Pro chronograph

    See post #336 Ray's review on X-ring is very good. Link: https://www.youtube.com/channel/UCFIWWN4fvPaB7fx_L6IiEyA/about ZY
  9. Z

    Garmin Xero C1 Pro chronograph

    Mainly a magneto speed user....and mostly SOL for pistol. Being able to take the C1 to the indoor pistol range, set it on the bench and get data is a huge step forward for me. Just happen to be working on three new barrels in three calibers and two powders. Accuracy and velocity data at the...
  10. Z

    Bartlein BB steel barrel, wearing one out...

    My 6BRA is over 3200. 29.2 H4895 @ 2804 has been very consistent since about 200 rds in. I have crept the seating depth out a few thou here and there, but it still shoots lights out. My 3-4 other 6BRA were pulled ~ 2400-2500 as they slowed down, tossed a flier here and there. Very happy with...
  11. Z

    Lowest recoil viable PRS caliber

    22 BR….pretty close to a 6 BR dope (especially inside 800), 88 eldm (around 3000-3050) or berger 85.5. (Around 3100) in stock most times. And loves Varget…also usually available. 6 BR brass one pass in 22 BR die and good to go.
  12. Z

    Pneumatic stapler

    If you dont want to go slap…Milwaukee fuel….M12 or M18. Zero need to drag a hose and compressor around.
  13. Z

    Question: Selling a Used Supressor

    As above private sale in state. Or Form 4 to a dealer (can be in any state. $200, but usually approved in 30-60 days) then dealer can sell to another dealer (Form 3) or an individual via Form 4 ($200). As you can see, the $200-$400 vig makes used suppressors a niche market…. ZY
  14. Z

    6 Creedmoor, heavy bolt lift

    I will repeat this....no guessing required.... "Also measure base to shoulder with a comparator on virgin and the virgin sized and see if you are somehow pushing the shoulder fwd." ZY
  15. Z

    6 Creedmoor, heavy bolt lift

    Try some loads with virgin brass you did not resize. Also measure base to shoulder with a comparator on virgin and the virgin sized and see if you are somehow pushing the shoulder fwd. ZY
  16. Z

    8.6 Blackout headspace

    Glad it worked out!
  17. Z

    8.6 Blackout headspace

    Close but still too far you want .002-.004 added to your go to not close or just barely start. Use your witnessed mark, screw the barrel in about 90 degrees. Then check go and go plus 2 or 3 layers of tape. 16 TPI is 0.063 per rotation. Quick math…I think about 90 should do it. PS…thats...
  18. Z

    8.6 Blackout headspace

    Is this a new action? Be sure you have some lube on the bolt lugs. You could use a sharpie to make a witness mark, back it off, remove the gauge, then reset to the witness mark and tighten.
  19. Z

    8.6 Blackout headspace

    Your doing it wrong. Dont tighten and then back off. - put two layers of scotch tape on the base end of the go gauge -tighten the barrel until snug contact -tighten barrel nut hand tight -remove go-gauge -tighten barrel nut, don’t t let barrel turn - remove scotch tape and ensure bolt closes...
  20. Z

    SOLD ARC Coup de Grace Bolt Action - NIB - sold

    TTT
Top Bottom
Back
Home
Forums
Merch
Alerts