Search results

Search the forum Search Articles
  1. S

    Scar 20s muzzle device change

    I meant 6mil. It's a Tier One 33mm height for the ZCO 4x20x50. Close fit, but it clears. I think I may have to order a 0 mil mount as this new barrel wants to throw them higher than the scopes current adjustment. I finally got my muzzle brake off with a lot of heat and had to cut the crush...
  2. S

    Scar 20s muzzle device change

    I forgot to ask, does that dimple protrude through the brake in any way causing some of the friction we encounter?
  3. S

    Scar 20s muzzle device change

    Damn, I had mine practically glowing and it wasn't wanting to move. My previous 20s barrels were tough but this one, a little scary. On a good note, I took it out to shoot a few rounds to get on paper and finally got it on the bullseye with 4 rounds in 1/2". No primer issues. Bad note, my scope...
  4. S

    Scar 20s muzzle device change

    Hey guys, A couple weeks ago I mentioned in a scar thread that my 6.5cm was piercing primers and blowing a few as well. This occurred suppressed and unsuppressed. Apparently it has been an issue with a few others. I tried to analyze the problem and then took it to mile high and get their...
  5. S

    LMT MWS .308 WORTH IT???

    Check out the latest video on YouTube for "small arms solutions" channel. Bartocci does a great review of it and he knows his shit. I have an lmt mrp sbr piston and it is my favorite ar I've ever had. Btw, the scar 20s has no problem hitting 1300y. Both in 308 and 6.5.
  6. S

    LMT .308 MWS

    I dont know that I really notice much difference between DI vs piston except that piston has a really smoothed out recoil. That and it is really clean. I like them so much that I have a lot of them. I usually don't play with the settings as I want them to function, but with an OSS you don't need...
  7. S

    LMT .308 MWS

    You're going to like that 12" piston. I got one last year and it is smokin' accurate. Suppresses remarkably well (OSS can). My favorite AR.
  8. S

    Sako TRG M10

    Yes
  9. S

    Recommended Semi Auto in 6.5 Creedmoor

    Well, son of a bitch! My 20s 6.5 pierced primers and blew one out and left metal in the firing pin hole causing a misfire today. I just read a thread on the fn forum and wasn't aware that this is a problem with the 6.5. I'm not sure fn is even fixing it correctly. As much as I love the 20s, I...
  10. S

    Sako TRG M10

    Me too. I got mine yesterday. 1:8. Got powder, primers, brass, dies are on the way, now to find some bullets!
  11. S

    Sell me on LMT

    I love my lmt piston. I have the 12" barrel with an oss helix can on it. I find it extremely pleasant to shoot and worked up a load last fall with sierra 55g blitzkings, Norma brass, CCI 450s and IMR 8208 XBR at around 1/2 moa. I couldn't seem to get any heavies to do much better than 1 moa...
  12. S

    Recommended Semi Auto in 6.5 Creedmoor

    I love my scar 20s in 6.5. I never heard about the popped primers but I had the same experience a couple months ago. I was freaking out about it as the previous sessions never experienced the issue. So I checked the lot numbers on my ammo and it seemed to be a single box of one lot that was hot...
  13. S

    Sako TRG M10

    Where are you getting the mlok handguard? They make them for the trg 42/22 A1 series that I understand fit, but I cant find a source.
  14. S

    Sako TRG M10

    Thanks Mayvic, I sure hope that is their universal twist rate. I can't imagine sako would produce 2 different twist rates for different markets. I just ordered the 300nm for 50%off. Great deal
  15. S

    Sako TRG M10

    It is. But i aint buying it unless it's got at least a 1:10
  16. S

    Sako TRG M10

    Exactly. I just got a 338 barrel kit today and it was listed on beretta's website as 1:11 twist. Opened the box and its 1:10 which I figured it was. I called Beretta today and waited 20 minutes for an operator and then another 5 for an answer to the 300nm twist rate. The guy said it was 1:11...
  17. S

    Sako TRG M10

    Does anyone know what the twist rate is on the 300 NM barrels are? Beretta usa says 11 but they say the same for the 338LM which I believe to be a misprint as the brochures I've seen out of sako say 10 twist on both calibers. 11 would be just stupid in my opinion.
  18. S

    What to do with an FN SCAR 20s in .308

    I cut mine down to 18". It got rid of the stupid narrow shoulder. I think it's the perfect length for the 20s. Lighter and much better balance. My accuracy improved too. I've got a scar 17 so another 16" barrel seems redundant.
  19. S

    Sako TRG M10

    I bought a 308 barrel on sale for about $550 last year. Kind of expensive for an extension but cheaper than getting a machine shop setup for a handful of product. LRI to my knowledge was thinking about producing some but never did. I contacted them last year about it and got the same answer. I...
  20. S

    PortaJohn

    I recommend Ex lax
Top Bottom
Back
Home
Forums
Merch
Alerts