Search results

Search the forum Search Articles
  1. M

    SOLD Custom SAC FN SPR w/ XLR Evolution Chassis - SOLD

    Sorry bout that, uploaded them to server instead of hosting to Imgur
  2. M

    SOLD Custom SAC FN SPR w/ XLR Evolution Chassis - SOLD

    Up for sale is my FN SPR built by Short Action Customs, complete with XLR Evolution stock which has been skim bedded to the action. I have $3,880 into this rig, with the following done: Receiver trued by SAC. Runs like absolute butter. Bartlein MTU 26" barrel in .308 SAC tactical match 10...
  3. M

    Vietnam Tiger Stripe in Cerakote

    Sweet Jesus that is nice. Are you taking on new work? What is your website address?
  4. M

    WTB Fireformed 6mm Dasher brass from Lapua 6BR

    As stated in title, looking to buy any scrap brass you may have, don't care about primer pockets or # times fired. I need it to send to Lee for a collet die and also to set up my Giraud trimmer with. Any amount is fine. Thanks!
  5. M

    PSA for XLR chassis owners

    Well I learned a valuable lesson today. If you've got an XLR Evolution with a picatinny rail up front, and you want to hang a heavy bipod like an Atlas 5H and load it pretty hard, mount the bipod as close to the install screw as possible. I mounted mine on the end of the rail and ended up with...
  6. M

    New Ruger RPR's - Magnum options

    I know...dumb question about the bolt. I have looked into getting an elisio tube setup, but it would just be nice to have an exact match to my RPR short action.
  7. M

    New Ruger RPR's - Magnum options

    I was really hoping they would come out with a long action RPR. I want to do a 284 Winchester loaded long. However, looks like I'll run into an issue with bolt size. Neither 300wm or 338 will work. If I screw on a 284 barrel on the short action version with a bunch of freebore to allow me...
  8. M

    Advanced Marksmanship Best technique for consistent .75 moa or less shooting from a tripod.

    So just another data point for you. I went through this whole tripod exercise and invested in an RRS setup with leveling base. Here's a pic with my Custom FN SPR sitting on top of it: I'm a pretty consistent .4-.5 moa with my setup over a bipod/bag with occasional .1 - .3s every now &...
  9. M

    New 1000 yd world record.1.068”/50-5X

    Truly amazing accomplishment!
  10. M

    Does Anyone Have Experience with the PVA Jet Blast Muzzle Brake?

    I have one on my Criterion barreled RPR. Very effective at recoil reduction. I didn't have much luck keeping it tight using hand pressure only as shown in their video. It always worked itself loose. Once I snugged it with a wrench, no problems since
  11. M

    6.5 PRC

    Just curious, what are you seeing accuracy wise?
  12. M

    FN SPRs at Tactical Coordination

    In my case, it was 6800 rounds and then went to shit. I bought a borescope at that time, and it was an ugly cracked spider web. I replaced it with a 1x10 from SAC and it was slightly more accurate
  13. M

    RRS VYCE or Hog Saddle

    Excellent - I use mine on a Bell & Carlson Medallist which is rounded, and it locks it in... ummm like a vice :-)
  14. M

    RRS Leveling heads- RRS TVC-33 & Feisol 3372 + Anvil 30 comment

    Hey Gents, just wanted to give props to Diver. I picked up an RRS 33 series tripod w/ leveling base (which I detailed in a separate thread). Struggled a bit with it at first shooting roughly 1.5 moa. Based on his advice, I implemented the following: Two legs facing forward, single leg facing...
  15. M

    So you guys wanted a way to mount your Magnetospeed with no POI shift?

    So just for the benefit of the rest of us, and us not knowing what the impact of the MS is on your setup, can you conclude that this adapter eliminates the poi shift vs the strap?
  16. M

    So you guys wanted a way to mount your Magnetospeed with no POI shift?

    Was one of these groups with magspeed attached normally with strap? That's the biggest thing I want to see, strapped magspeed vs MK mounted. Hopefully I'll get a chance to test tomorrow. On another note is that 100 yards? If so, good God you are blessed to have an indoor 100 yd range...
  17. M

    So you guys wanted a way to mount your Magnetospeed with no POI shift?

    Yea I can see the challenge in trying to manufacture something that is going to fit every configuration out there. Luckily it looks like it is going to work with everything I have thus far. Here it is on an RPR w/ a 28" barrel (Note that I do have the MI 18" handguard, which makes a big...
  18. M

    So you guys wanted a way to mount your Magnetospeed with no POI shift?

    Well yes I did, but its possible those screws originally came with the Magnetospeed base, and I've lost them somewhere along the way (not sure). The mounting plate they provide does match up to the base perfectly.
  19. M

    So you guys wanted a way to mount your Magnetospeed with no POI shift?

    Hi Tyler, Just received the mount. Must say, excellent communication throughout whole ordering process. Packaging was top notch, great finish on product, and also nice underpromise/overdeliver on shipping timeframe :-) Quick question on the mounting bracket provided in the kit that attaches to...
  20. M

    So you guys wanted a way to mount your Magnetospeed with no POI shift?

    Totally understand. I am really hoping Tyler's solution works out. I have been using the MS for years & have been very happy. Its been dead nuts reliable, but I always use it after load development because of the POI/harmonic issues. I actually bought a Labradar for that reason, used for a...
Top Bottom
Back
Home
Forums
Merch
Alerts