Search results

Search the forum Search Articles
  1. crowsniper1

    Disappointed with "expensive" spotting scopes

    I just picked up a konus 80 mm this week and i used it to find hits on steel at 450 yards and it worked pretty good for what i paid. I have a bushnell elite doubler that fits the knous eyepiece perfectly and will give you a little extra zoom because the konus does not go to 60 x like it says.
  2. crowsniper1

    Looking for bullets

    Powder valley i think
  3. crowsniper1

    Rifle Scopes Can i use a leupold boresighter to measure scope tracking that has MIL adjustments?

    If any of you have used a leupold boresighter you know it has a MOA scale built in to check scope tracking and it works just fine with MOA adjustments. My question is how do i check a scope with MIL turrets using a MOA scale or can it be done? How much would 12 MOA or MILS (1 turret rev) read on...
  4. crowsniper1

    What to expect with a JP brake on my AAC-SD 308 ?

    Im having trouble getting used to the 20" barrel on my AAC rifle so i figured i would try a brake on it to try to tame the recoil and muzzle jump a bit.Any of you guys use this brake ? Is it going to be so loud its miserable to shoot?
  5. crowsniper1

    308 168 gr SMK. Need some load data

    I have one rem 700 that likes 43 varget the other likes 45 grains. I would work up from 42 to 46 grains in .5 grain increments and see what works . A chrony helps fill in the blanks too.
  6. crowsniper1

    Can i put a limbsaver recoil pad on my H S precision stock?

    Mine has the factory remington hard butpad on it and i have a limbsaver that looks like a perfect fit. Will i ruin my stock if i remove the factory pad,i understand they are glued on. Is there anything solid in the stock for the screws to bite into so they wont pull out?
  7. crowsniper1

    Lets see those tactical 22s!

  8. crowsniper1

    Super Sniper on Rimfire

    I have a SS 6X on mine
  9. crowsniper1

    Rifle Scopes Vortex Viper PST 4-16, 6-24 or Leupold ?

    The vortex PST i had was a turd and long gone , go with leupold or sightron.
  10. crowsniper1

    Rifle Scopes Fvsr narrowed it down

    I picked one up myself and put a SWFA 6X ON MINE
  11. crowsniper1

    Rifle Scopes What glass for my new AAC-SD?

    I have a long range 26" .308 with a 6-20x50 scope already set up so the 20" AAC 308 will be for shooting 600 yards + /- . I have an extra 3-10x40 leupold mildot and a SWFA 6x mildot,both have nice glass but which one would be better suited for this rifle?
  12. crowsniper1

    Rifle Scopes Leupold VX-3L

    Re: Leupold VX-3L I have the 6-20x56 varmint hunter and it has some really nice glass,only thing im not crazy about is the 1/10 clicks but the 4-14 model would have 1/4" anyway i would imagine.I have it mounted in TPS low rings/20MOA base and it lines up great with the eye.
  13. crowsniper1

    Rifle Scopes Vortex optics

    Re: Vortex optics I had a 4-16 and the clarity was less i could tolerate so i sold it at a loss,they have alot of good features on the PST but the glass is lacking for me.
  14. crowsniper1

    Rifle Scopes Help with 20 MOA base setup

    Re: Help with 20 MOA base setup I have used the scope on a .243 rifle a couple weeks ago with no issues. I had a leupold 2-10x40 on this rifle not long ago with no issues ,i really dont know why i lost all the "up" on the scope with this setup
  15. crowsniper1

    Rifle Scopes Help with 20 MOA base setup

    I have a Howa 1500 LA , 20 MOA steel bases ,burris 30mm rings and a 16X super sniper mounted up on top. I used the thick base at the rear-short one up front mounted up my scope and used most of my adjustment to get a 200 yard zero.What have i done wrong with my setup? You can look at my turret...
  16. crowsniper1

    Gunsmithing Howa 1500 action torque specs

    I am trying to get my howa 30-06 with a wood stock set up for some long range shooting ,i installed some 20 MOA bases and tactical scope+ rings so far. This rifle has always shot under an inch at 100yds but i have never used a torque wrench on the screws ,just hand tight on them. Whats a good...
  17. crowsniper1

    Explain this if you can

    Could this be caused by a trim die? I could not get the bullets to seat and i have used this brass+dies before.It's .243 by the way.
  18. crowsniper1

    Help with ASVAB test results

    It's been 20+ years since i took the test in high school so i dont remember how to read the results so i need a little help. My 16 y/o son took the test last week and is interested in joining but im not sure i want him to at this time .Can some one look at the test results and tell me what kind...
  19. crowsniper1

    Chargemaster = Expensive thrower

    Re: Chargemaster = Expensive thrower I have the same scales as you ,rcbs 502 which has always worked well and the chargemaster,so far no complaints with mine.If it dont work right i would send it back though.
  20. crowsniper1

    Options for a high quality, fast 3 way trimmer

    Re: Options for a high quality, fast 3 way trimmer I trimmed a bunch of .223 last night with a lee zip trim using a battery drill with the cutter clamped to my bench,only takes a few seconds to trim a piece.
Top Bottom
Back
Home
Forums
Merch
Alerts