Search results

Search the forum Search Articles
  1. T

    Best overall complete lower?

    Alright guys, alot of trial and error, pricing things out based off suggestions, and I think I finally got it. I have 2 lowers that I will be building. 1. 9" aac 300blk (I want a 8.2/8.5 noveske, but noone is in stock) SBR 2. 5.56 16" of "lower" quality , that will be interchanged with other...
  2. T

    Bumping shoulders too far back?

    OK, Here is what is going on! I use a hornady comporator gauge set with the .420 insert which is supposed to cover 338lm. By mile's advice, I tried measuring the bump with a different tool. I used a 45 ACP case which sits literally mm below where the other gauge does. Voila.. Looks like I'm...
  3. T

    Suppressors osprey 9 vs 45

    I'm not dead set in the Osprey. I have just always heard only good things about it so I assumed it was the best. I will look into the other options now, thanks.
  4. T

    Suppressors osprey 9 vs 45

    So I've done all the reading and I'm not trying to beat a dead horse here. I understand the advantages and disadvantages. I think about 95% of the cans use will be on a 9mm. From my understanding, it boils down to the 9 osprey being 3db quiter than the 45 osprey with a 9mm piston. It seems...
  5. T

    Best overall complete lower?

    Awesome, I will probably be doing this. Thanks
  6. T

    300blk upper

    Well I've narrowed it down to: 8" seekins the new 8.5" noveske 9" aac I gotta decide soon, shit! They all have their pluses. I like that the seekins has the rail come further than the end of the barrel. It hides the suppressor a bit and thats sweet. But it doesn't come with any attachments at...
  7. T

    Bumping shoulders too far back?

    This is a cut open 3x fired. Absolutely no signs of case head separation.
  8. T

    ELR 308/338 shooting

    Actual altitude is 1800. DA was 6500 at 85 degrees. Heres what I got for my 338lm drops in mil's. My suppressor zero is 0.6 mils above my zero and all these were shot suppressed. So for example, the 470 is actually 2.2mils : 470-2.8 1037-8.0 1236-10.4 1471-13.5 1607-15.5 1760-17.9 1936-21...
  9. T

    ELR 308/338 shooting

    Had a couple record distances the other day, thought I would share whats 'possible' . My buddy and I are contemplating making a small local ELR match so we took out 9 of our targets and put them at various distances to go through it once and see what would be reasonable size targets. Conditions...
  10. T

    300blk upper

    So then anything past 8-9 is just for looks reason? (if the point is subsonic use)
  11. T

    Multiple rifles in one caliber

    My seaters a Forester Competition, so they have micrometer adjustments. Super easy to adjust between loads....
  12. T

    Bumping shoulders too far back?

    I actually just trimmed this last firing with my Giraud. Actually under trimmed accidently (2.710),so that is not the issue.
  13. T

    Multiple rifles in one caliber

    Actually replaced it with something else a while ago, I've just been lazy to update the signature haha I'm gonna try to Redding set and see how that works out
  14. T

    Bumping shoulders too far back?

    Everything looks good on my end from the outside. I will cut one in half and see.
  15. T

    Multiple rifles in one caliber

    Excellent. Exactly what I was looking for. Thank you
  16. T

    Multiple rifles in one caliber

    What do you guys do when you have multiple rifles in one caliber? More specifically the full sizer... The bushing can be replaced very easy only for different brass, however the issue is with bumping each only .002 back. Currently I have the die all locked up to push my main rifles brass .002...
  17. T

    Bumping shoulders too far back?

    So what do I do... Isn't over sizing bad for not just brass life but also accuracy?
  18. T

    Bumping shoulders too far back?

    So I have 'done it all' sort of speak to try to figure this out when it happened originally. I tried to sharpy an entire case, and there was no marks. I have measured the trim to length with the Sinclair tool and I have a far way to go before worrying about trimming. Lastly, I have measured...
  19. T

    Bumping shoulders too far back?

    I usually bump shoulders back .002". However with my AX338, I have to bump back a full .006" untill there is 'acceptable' resistance on bolt close. Bumping back .004" results in a VERY harsh close. Now, its not effecting accuracy or anything like that. But I'm just wondering whats going on? I...
  20. T

    Suppressors 30 cal suppressor recommendations

    So I'm heavily leaning towards Silencerco. now Specwar vs saker... It looks like Specwar is a bit bigger but obviously suppresses better. Does it work much better for the 300blk?anyone use it on a 9" barrel, is it too big or bulky for a small rig like that?
Top Bottom
Back
Home
Forums
Merch
Alerts