Search results

Search the forum Search Articles
  1. E

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    Great looking action !!!
  2. E

    Mack Bro’s SS Evo

    It’s called “crystal clear” 😂 . I have the. Carbon six barrel just didn’t grab it for this photo
  3. E

    Mack Bro’s SS Evo

    Getting parts together for a carbon 450 build
  4. E

    TBAC brake stuck in suppressor?

    My Ultra7 is a direct thread now
  5. E

    Ruger no. 1

    Great looking setup you have me looking for a blued one now !
  6. E

    350 Legend - Affordable Range Fodder

    Haven’t had a chance to get out yet but this rifle is ready to hunt. Hoping to load up some Bear Creek Copper bullets to try out on does in the late season .
  7. E

    SA BDL Feeding Issues

    I see you already bought another magazine setup but here's what I learned from LRI in the old gunsmith forum . Pull your bolt and put a round in the magazine . looking in the bolt hole in the rear of the action you should see one third of the round sticking up in the action . If there's too...
  8. E

    Mack Bro’s SS Evo

    Going to modify the 700 wrench it looks like the lugs are just narrower
  9. E

    What happened to Dracos Barrels?

    I'll dig one out tonight and check the size
  10. E

    Mack Bro’s SS Evo

    Our Remington action wrench doesn’t fit they must have changed the bolt head size on the Evo II
  11. E

    Ruger no. 1

    It gets to me sometimes disassembling some really nice factory rifles but making into something nicer makes it alright .@Deets check out that scope base on this Ruger .
  12. E

    Ruger no. 1

    Cdnn had a bunch of the 450 bushmasters in stainless I would watch them, they seem to have lots of rugers
  13. E

    Ruger no. 1

    It seems to work well but limits the shooter to whatever scope fits the supplied rings . You don't get much forward and back movement at all. Considered tapping for a weaver base on the barrel but that factory base polished up so nice and looks good.
  14. E

    Ruger no. 1

    If you don't find one in the caliber you want the No1's are pretty simple to rebarrel . Customers that buy the factory 450bm want them rebarreled with longer barrels and in the standard 16 twist.
  15. E

    Ruger no. 1

    Build a 700 remington and install a single shot follower https://www.midwayusa.com/product/1015300323 We upgraded here in lower Mi shotgun zone to straightwall cartridges and its been great . Not as nice as using any rifle cartridge but way better than shotguns .
  16. E

    What happened to Dracos Barrels?

    Do you want to try a 6 creedmoor barrel ? I have one unfired that I haven't installed.
  17. E

    Recommendations for a Hard Case for Shipping a Barreled Action?

    We ship barrels and barreled action all the time selling many barrels on ebay . Our store has two grades of pipe insulation get the thicker one the sides are about a half inch thick . We also have pool noodles but the inner holes are too small most of the time. The rear tang will cut thru most...
  18. E

    Recommendations for a Hard Case for Shipping a Barreled Action?

    The first thing I do is wrap the barreled action in foam pipe insulation and tape it shut . Find a box that is fairly close to the barreled action size wrapped in foam , fill all the air space so if it gets dropped on end it doesn't hammer thru the end of the box . If it's fairly heavy I cut a...
  19. E

    Gunsmithing Plugging an AR gas port

    Just flip the gas block around so the block seals on the top of the barrel
  20. E

    Chamber Choices for .223 Rem Bolt Gun

    I would go with the Mack Bros action over the Origin if it were me . The Origin has some rearward slop that drives me nuts . I built the same gun your describing Origin action 1 in 7 twist 223 match chamber in MDT chassis . Its been out to 1050 yards a couple times a real gas to shoot .
Top Bottom
Back
Home
Forums
Merch
Alerts