Search results

Search the forum Search Articles
  1. wnroscoe

    Suppressors Socom 556-rc

    For 10.5" or less (pistol rated AR's) running suppressed, I'd run a brake / mount combo for sure. I've even spoken to Surefire about the fit and required clearance of my hand guard. They recommended the brake for 10.5" or less too. Think of the brake / mount as a sacrificial blast baffle. If you...
  2. wnroscoe

    Gunsmithing Barrel Blanks

    http://www.snipershide.com/shooting/firearms-sale/242407-new-bartlien-barrel-blanks-sale.html#post3025550
  3. wnroscoe

    Gunsmithing Extractor Style

    If I were to order one tomorrow I'd order the bolt with spiral flutes, M16 extractor, threaded bolt handle and elliptical bumps ground to .704" with a .700" bolt body and have the receiver raceway reamed to .705".
  4. wnroscoe

    Gunsmithing Extractor Style

    You could run the standard .700" bolt body with .704" elliptical bumps and be fine. The elliptical bumps would tighten up on closure but upon opening create more clearance for smother bolt cycling.
  5. wnroscoe

    Gunsmithing Extractor Style

    I'd order the bolt with spiral flutes, M16 extractor, threaded bolt handle and elliptical bumps ground to .704" and have the receiver raceway reamed to .705". Good luck with your project, should be a shooter.
  6. wnroscoe

    Sidearms & Scatterguns SOOOOON OOF A....i had my glock cherry popped today

    Sorry man, I had to do it. I've been carrying Glocks since 1992 or so (SPD Days) and I have to tell you, I hated them too at one time, until I shot one. My concealed EDC is a Gen 4 Glock G23 and the trainer to it is a Gen 3 G19. Both are spot on accurate but, the G23 rocks and does so very...
  7. wnroscoe

    Gunsmithing Cerakote H-250Q AI FDE

    Does anyone have a picture of a rifle painted in this color. Just curious as to how close it match's the AI FDE skins.
  8. wnroscoe

    Gunsmithing Longshot Rifles, inc

    Filing bankruptcy, whether chapter 7, 11 or 13, does not exempt you from or afford you protection against prosecution from criminal acts. If you are a victim of theft, act swiftly and deliberately, make his acts known to the local authorities and to the Bankruptcy Trustee of that Federal...
  9. wnroscoe

    Suppressors Socom 556-rc

    Haven't tested POI shift yet but admittedly, it was purchased for my 10.5". Not sure if minimal shift would really matter for a "house rifle" I need to shoot some paper with it on my Mk114 to test the shift if any. Email is the best way to get me or just call.
  10. wnroscoe

    7mm choice in an SA - 7-08, 708AI, or 284 ???

    Straight 7/08, 1-9 twist for 150/162's or 1/10 for 140's and under. Brass is easy to acquire/make. Skip the 284 in a SA due to the COAL needed to bring the 284 to life. The 7/08 AI would be fine but, the AI's do feed funny in a staggered feed internal box. If AI is the route you go look for a...
  11. wnroscoe

    True & Blueprint Rem 700

    First, just truing the receiver will not improve accuracy at all. The only thing that will happen is the receiver face and lug abutments will be true and perpendicular with the bolt race way and help the barrel "Look" straighter down range, that's it. If the receiver threads are re-cut the...
  12. wnroscoe

    Gunsmithing Guys who has a link to Wnroscoes bedding DIY project

    Yes Mark, that is one of the pictures. My PM's are turned off, email is the way to reach me. [email protected] 318-422-0421
  13. wnroscoe

    Gunsmithing Does Truing/Blueprinting an action lead to smoother/easier function?

    Usually, when the receiver is trued to include the bolt lugs and a bolt knob added it feels some what smoother. There are several other factors though that help in the felt smoothness of operation. A few other things to consider are; Cocking ramp and cocking piece contact surfaces Firing...
  14. wnroscoe

    Action Truing -VS- Squaring the Face

    Doug, First, I'd always true the receiver over pinning the lug if I had to choose. Truing the receiver doesn't mean truing the face and lapping the lugs. It means dialing in the receiver and single point cutting the face, threads and lug abutments, all in the same set up. It also includes...
  15. wnroscoe

    Suppressors Socom 556-rc

    Solid advice. As a side, after the brake was installed, as I always do/check I inserted a 22 caliber range rod in the bore through the brake to check alignment. It was perfect with even clearance between the range rod and brake. Zero chance for a baffle strike, caused by the brake anyway. It...
  16. wnroscoe

    22lr ammo

    Clarks Guns in Haughton has several 500 round bricks for $55.10 per. Solid's and Hollow Point. Call Jim or Matt on Monday, they may ship but I'm not sure. 318-949-9884 Clark Custom Guns, Inc. Home Page
  17. wnroscoe

    Whats the best arm ex.

    Suck it up and hit the gym bro. For me I warm up and do 5 heavy sets of each exercise of 5-9 reps to failure. Incorporate the big four lifts into your regimen and stick to it. Bench Press, Over Head / Mlitary Press, Squats, Dead Lifts. Also, incorporate additional assistance movements into you...
  18. wnroscoe

    Sidearms & Scatterguns Glock 34 & 17

    I purchased a Gen4 34 because I thought the extended sight radius and supposedly tricked out trigger and sights would matter. I trained with it and ran it for a while but was never sold on it 100%. The trigger as issued was OK but, I did get front site twitch during dry fire practice. I...
  19. wnroscoe

    Gunsmithing Guys who has a link to Wnroscoes bedding DIY project

    Since this was so popular and Tiny pic hosed you, I'll re-work it on the next bedding job I do, I'll even through in a DBM bedding section since this has been asked about several times. I bed all DBM's now, no matter how good the fit is, period. A few things have changed but, for the better...
  20. wnroscoe

    Gunsmithing wnroscoe 7 PM's

    Guys, recently I've been receiving emails from SH advising me that a few people are trying to reach me via PM's. I have turned this feature off and emails continue to be the most effective avenue of communication. Thank you. [email protected]
Top Bottom
Back
Home
Forums
Merch
Alerts