Search results

Search the forum Search Articles
  1. WYCFM1

    Tikka T3 Thread

    No I really didn’t want to go that far but I mean really it’s a matter of like .020” maybe little more...I think I’ll take a little of with my dremel. Thanks
  2. WYCFM1

    Tikka T3 Thread

    I believe the case hitting the bolt is because atlas bottom metal is the longest coal bottom metal for tikka t3x right now and it’s just cut out a hair to far towards the trigger. So if your case is comingup the magazine just right the case hits the bolt a bit until I give it a smack...its most...
  3. WYCFM1

    Tikka T3 Thread

    Has anyone on here had their t3x long action ejection port milled for loads with COAL at or around 3.600” ...I have a 300wm that hammers the Berger 180g elite hunters but only when I put them about .010 off the lands...when I finally got them to feed reliably by modifying the feed ramp with a...
  4. WYCFM1

    Budget 300 prc recommendations

    I put an area 419 hellfire on my factory tikka t3x .300 win mag with a ziess v4 and atlas bottom metal, area 419 20 min base, loaded up some 180 Berger hybrid elites 76g retumbo on Hornady brass, shot 3/4” 5shot groups repeatedly, sent a few 8” groups at 1000 and some 12” at 1300 and some 14”...
  5. WYCFM1

    300 PRC

    My point being I don’t think there’s any problem with doing a magnum...my rifle really isn’t bad on the recoil...it is a large brake tho
  6. WYCFM1

    300 PRC

    Hmm...I put an area 419 hellfire on my factory tikka t3x .300 win mag with a ziess v4 and atlas bottom metal, area 419 20 min base, loaded up some 180 Berger hybrid elites 76g retumbo on Hornady brass, shot 3/4” 5shot groups repeatedly, sent a few 8” groups at 1000 and some 12” at 1300 and some...
  7. WYCFM1

    Bottom metal

    Anybody sell a long action hinged floor plate that will feed 3.600 -3.715 coal?
  8. WYCFM1

    Gunsmithing Bottom Metals

    Hey guys, my main focus for putting together rifles is for hunting fairly lightweight, durable, and making accurate shots at whatever distance is purely required. Every rifle I’ve got built or built has had to have a aics type mag to run Berger’s or whatever shoots best out of rifle seated...
  9. WYCFM1

    brass life

    i have flattened primers so im gonna turn the load down and ill post results.....
  10. WYCFM1

    brass life

    Recoil feels like they are going pretty good. But I wouldn’t say over 3000 FPS. It feels like the recoil is really fast. Also I run a hellfire brake so
  11. WYCFM1

    brass life

    Would anybody here consider 78.5gn of retumbo and a 180gr bullet out of factory 24” barrel a hot load? I don’t want to change because this consistently shoots .6
  12. WYCFM1

    brass life

    Would anybody here consider 78.5gn of retumbo and a 180gr bullet out of factory 24” barrel a hot load? I don’t want to change because this consistently shoots .625” at 100m
  13. WYCFM1

    brass life

    Sorry guys no can do on jamming lands. It’s a hunting rifle and needs to feed in 3.715 aics mag.
  14. WYCFM1

    brass life

    Do you suppose this could be a big part of why I can’t get decent brass life? I use a Hornady match grade FL and plenty of case lube, if that gives some insight. Or what do you suggest?
  15. WYCFM1

    brass life

    ok guys so i bought the hornday headspace gauge for my win mag and started with fresh factory brass. i fire formed a bunch of brass and measured a few different pieces throughout. my fire form brass was growing .012 on average. some grew up to .017!!! i think my chamber headspace needs shortened...
  16. WYCFM1

    Firearms Maybe WTS: custom 6.5 creedmoor $1700

    Ttt
  17. WYCFM1

    Optics Maven C1 10x42

    I’ve got a set of mavens for sale. Ended up getting the B1s so don’t really have much use for the c1s anymore. Comes in original box with neck harness and lens covers. Excellent condition barely used last year. $300 tyd
  18. WYCFM1

    Firearms Maybe WTS: custom 6.5 creedmoor $1700

    Oh and about 300 rds of Hornady once fired and some Hornady 143s included in that price.
  19. WYCFM1

    Reloading Equipment iso Retumbo

    I drive to Sheridan several times a month. I’ll keep I touch thank you sir
  20. WYCFM1

    Firearms Maybe WTS: custom 6.5 creedmoor $1700

    I’m waiting for a a reply from the gunsmith for the labor costs but I figure no more than $1700 into the rifle. So I would do about $1700
Top Bottom
Back
Home
Forums
Merch
Alerts