Search results

Search the forum Search Articles
  1. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant Ok remounted my scope using the feeler guages and once again everything is good with the world. After getting everything locked down I put the wheeler bolt raceway level in place and leveled the whole rig up, set the small level on the top of the elev...
  2. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant If u look in my op the base is bedded
  3. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant No at first I leveled the scope to the bolt raceway. Nothing seems to be in the same plane of level. The raceway and the badger rail are 1/4 bubble off. Then the forend and rail r off too. I'm gonna relevel it (feeler guage) to the badger rail and try a...
  4. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant After sitting back and thinkin about it the feeler guage method would give u the most accurate allignment between bore center line and optical center. My scopes is a nxs5.5-22 so I'm bankin in the bottom being true
  5. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant Yeah I got the wheeler 30 mm kit from midway. I wasn't to impressed with the levels it came with.
  6. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant Will give it another go with the feeler guages.
  7. W

    Rifle Scopes leveling crosshairs to reduce cant

    Re: leveling crosshairs to reduce cant I tried the feeler guage method at first and the scope ended up level with the rail but it was off with the chasis and the bolt rails in the action. I guess my main concern is what is grief am I gonna have with dialing in dope at longer ranges.
  8. W

    Rifle Scopes leveling crosshairs to reduce cant

    Ok heres my set up. Rem 700 sps tac in aics 1.5 , badger base (beeded) badger rings lapped. Got everything set up to mount scope but here is my question. The forend of the aics, the badger rail and the bolt rails in the action are not level with each other. Which one do i want the crosshairs...
  9. W

    Rifle Scopes Finally got it together. But a?

    Re: Finally got it together. But a? Yeah I got the blue flavor. I guess it's because they list red and green on the instructions. I'm gonna use the blue it will come off if it needs to. I bedded the base to the action. I'm gonna look at a few things today and see if lapping is needed. I've...
  10. W

    Rifle Scopes Finally got it together. But a?

    Finally got all the stuff to mount my nxs on my 700. I got all badger shit. But on there site they say no loctite on the ring cap screws. Any idea why? Gonna lap the rings when I get home from work. Hope I can get a answer on this. Thanks
  11. W

    Member Link Up Louisiana members.. check in here.

    Re: Louisiana members.. check in here. Baton rouge
  12. W

    Rifle Scopes nightforce nxs on rem700 sps tac

    Re: nightforce nxs on rem700 sps tac Thanks guys. Once again the hide comes through. Got an idea how bout a thread posting rifle, base, rings, scope obj size and clearance of the barrel? If it would get a sticky it would be a data base of diff combs and how they turn out.
  13. W

    Rifle Scopes nightforce nxs on rem700 sps tac

    Re: nightforce nxs on rem700 sps tac rob 01 do you have butler creek caps on your glass? How much clearance do u have?
  14. W

    Rifle Scopes nightforce nxs on rem700 sps tac

    Ive tried the search on ever poss combo that i could think of.I read the sticky on determining ring hieght but i have a prob i want to order the rings and base at the same time. I have a rem sps tac 308 and a nightforce 5.5-22x56. im going with the badger 20moa base which badger rings do I need...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts