• RIX Storm S3 Thermal Imaging Scope WINNER!

    Thank you to everyone who particpated!

    See the winner

Search results

Search the forum Search Articles
  1. K

    RRS BRACS for Remington RACS Fit Issue

    This might be a niche topic, but any Remington RACS chassis owners that have a RRS BRACS ARCA plate? I placed a custom order to have a run of the BRACS plates made, and they do not fit properly on my short action RACS with a full length fore end tube, nor with a spare XM2010 fore end I also have...
  2. K

    Gunsmithing McMillan Fiberglass Stock Repair Work Recommendations

    Any recommendations for a shop that can professionally and reliably (as in not take my stock, money and not have no updates or response to status queries for months on end) fix the target butt system that has fallen out of my McMillan fiberglass stock, as well as do some minor patch work on the...
  3. K

    Navy NSWC Crane M83

    So after searching this forum and elsewhere online, and basically finding no source of information on this, I figure let’s start a thread on the apparently VERY little known M83 sniper rifle, built by NSWC Crane for the Navy SEALs sometime in the 1980s, before the M86. I will share the little...
  4. K

    Rifle Scopes Leupold Mk4 Scope Work

    Hi, all. Anyone know of good shops of repute that can work on older fixed magnification Leupold Mk4 and Ultra scopes? Basically I have a couple such scopes with a different issue specific to each one, and would like to Frankenstein's monster them to consolidate the issues into one scope and get...
  5. K

    Accuracy International AW and AT Chassis Question

    Hey, all. I have a question about the interchangeability of chassis parts between an older (1997) AIAW and a newer AIAT. Specifically, if one is a fixed butt stock and the other is a folder, would the butt frames be able to be taken off and swapped between the two, presuming both have...
  6. K

    Gunsmithing Removing Bedding From AICS Chassis

    Picked up this AICS recently and it is bedded to the previous action. Anyone know someone that can professionally remove the bedding and get the chassis back to its original action frame? Will pay for the service, of course. Thanks in advance!
  7. K

    Precision Rifle Gear Bipod Identification Help

    Need some help identifying this bipod. Thanks in advance!
  8. K

    Rifle Scopes Accuracy International Dovetail Bases for Remington 700

    Does anyone make a Remington 700 base that has the Accuracy International dovetail? I think it’s 11mm wide, but someone that knows better please correct me if I’m wrong. I have this original green S&B PM 6x42 that I would like to use with its original AI mount (since it’s correct for the scope...
  9. K

    Remington 700 Tactical Receiver Marking

    Does anyone know about Remington 700s that are marked “Model 700 Tactical” on the receiver? I’ve seen the M24s with their “Model 700 M24” and the AAC ones with “Model 700 AAC-SD” but can my seem to find a source of info for the ones marked “Tactical”. Thanks in advance for any info. Pic:
  10. K

    Rifle Scopes Leupold Mark 4 16X Scope Help

    Hi all. I just got a Leupold Mark 4 16X scope and find that not only does it have very shallow eye relief, I am not able to get the entire field of view from edge to edge when focused in. Basically the top 5% or so is “cropped” out and blurry when I view through it. Whereas a Leupold Mark 4 10X...
  11. K

    Gunsmithing Removing Stripped Hex Head Bolt

    I know this has been asked before, but various self fixes have been attempted without success, so hoping to find a shop that can professionally and quickly fix this. Got a stripped hex head bolt that I’m trying to get removed. It’s the second bolt from the rear of a MIRS mounted on a R700...
  12. K

    Identify This Remington 700

    Just picked this up from a dealer in TX. It looks like it could be a department or agency trade or turn in. Dealer says they are unable to provide any background on it. Don’t suppose anyone knows what organization or group this may have belonged to, if it even has any significance at all? FYI...
  13. K

    Gunsmithing Converting McMillan Stock From Left to Right Handed

    I know this was asked years ago, but does anyone know who can professionally convert a left handed McMillan stock with molded-in gel coat finish to right handed use? I just got an older left handed A3 stock in molded-in woodland camo that I would love to convert and use as a vintage build. I’m...
  14. K

    Gunsmithing ARMS Ring Replacement Screws

    I have an older set of 30mm ARMS rings. One of the rings is missing a top screw. Anyone know where I can get a replacement screw? Or the dimensions of the screw to take to the hardware store to find a suitable replacement? Thanks!
  15. K

    Precision Rifle Gear Stock Packs

    Anyone know if tri-color desert camo DCU stock packs were ever made? Looking to find one if possible, preferably by one of the legit tactical nylon makers like Eagle Industries.
  16. K

    Leupold and Nightforce Ring Markings

    I have different sets of Leupold and Nightforce rings that differ in whether they have the company markings on them or not. From what I understand, earlier Leupold rings did not have any markings, but later ones have the logo engraved on the top halves. Nightforce seems to be the opposite, where...
  17. K

    Accessories WTT McCann Industries M24 Mk13 Mod 0 LA MIRS Rail

    Have a McCann Industries long action MIRS rail (same as used on the M24 and Mk13 Mod 0 builds) that I would like to trade. It’s been field used and it shows. I’m looking to trade it for (preference in this order): - Short action MIRS rail, no preference in version or revision, same terms as...
  18. K

    SOLD WTS Fully Decked Out Harris 6-9" SBRM Bipod w RRS ARCA Clamp, Custom Feet, Etc

    For sale is a fully decked out Harris 6-9" SBRM bipod with notched legs. It comes with a RRS HC-PRO ARCA clamp mount, custom flat feet, and swivel locking lever. Asking $200 shipped. Pics:
  19. K

    WTB Nightforce Ultralite 30mm Low Rings

    As the title states, looking to buy a set of Nightforce Ultralite 30mm .885” low rings, the 4-screw version. Used or well-used and not abused is preferable. Thanks.
  20. K

    SOLD WTT Accuracy International 2.0 AT AICS Chassis

    I have this AI AICS folding chassis stock: - 2.0/early AT AICS for short actions - Folding, with factory FDE thumbhole skins - Military version Badger Ordnance IMUNS installed - I don’t have the original AI spigot block - All original and unmodified, excellent condition Looking to trade for a...
Top Bottom
Back
Home
Forums
Merch
Alerts