Search results

Search the forum Search Articles
  1. para1505

    Finished my Rifle

    I built a 7 PRC for ELR. I had a Krieger barrel installed on it 32" long for more velocity. Using the Satterlee method accuracy node showed 3096 MV I was hoping for 3150. I am using RL 26 and ELD M 180 grain bullet. Charge is just 3 tenths above Hornady manual max weight load. Haven't got to...
  2. para1505

    PTG Bolt

    What is a PTG M700 coned bolt and what is the purpose of it?
  3. para1505

    Carbon Tripod Attachment

    I using a DCF-432 tripod, it has the carbon fiber pole in the center of tripod for attachment point. Do they make an attachment if I remove the center pole to use top of tripod as attachment point
  4. para1505

    Pierced Primer

    6.5x47L 37.9 Varget Lapua Brass 123 Scenars CCI 450 Primer This shows to be a safe load in my rifle. Just pierced 1 primer. Never done it before and hasn't done it since Why?
  5. para1505

    Difference in Berger Bullets ?

    Their is so many Berger bullets, hunting and target. The BC,s are so close on most of them. So can their really be that much difference between them?
  6. para1505

    Wanting to start ELR target shooting

    I have been shooting out 1000 yards for about 12 years. I have decided I want to hit targets at 1 mile and 2000 yards. I shoot a 6.5x47L. I have been searching all over the web and comparing different calibers for this. This will be for target shooting only. Also I reload all ammo, shoot no off...
  7. para1505

    6x47L vs 6.5x4L

    Fellow shooters, I have been shooting a 6.5x47L for probably 10 years. I really have liked this cartridge. I've been using 123 gn Scenars MV 3000. I have been thinking a lot about a 6x47L for a while. I do not compete any more so this new barrel is for recreational shooting only. The area I...
  8. para1505

    Northern Shooter Supply

    They are closed until the 30th. So, I shoot a R700 short action that's been trued. My recoil lug is a PTG 0.350 thick. I know the Remage system needs a thinner recoil lug and NSS sells them. Does anyone know how thick they are and if they are precision ground lugs?
  9. para1505

    Chopping barrel from 26 to 22 inches

    I shoot a 6.5x47L, I do shoot suppressed now all the time. I will be using rifle for hunting and recreational shooting out to 1000 yards. I do not compete anymore. I shoot 123 grn Scenars. So, my question is would I be better off using a 140 grain bullet or 130 grain bullet with a shorter barrel?
  10. para1505

    Barrel Nut Systems for R700

    Do the Alternut that Shilen makes and the Remage at Northern Shooters supply work well on the R700? Are their any cons to these systems?
  11. para1505

    6x47 Lapua information

    Shot my 6.5x47L barrel out. Thinking about trying the 6x47L. I do not hear much about this cartridge. I figured it was the 6.5L necked down but the info I saw it has a 20° shoulder and not a 30° shoulder. That surprised me. Any of you that use this caliber please speak up and tell me your pros...
  12. para1505

    Magneto Speed V3

    I have a sporter for several years worked good but finally quit working. I shoot suppressed now so I got a Caldwell for a replacement. I regret that purchase, the chrono want link up with the app on cell phone so it's really useless. Are the V3's good to go for suppressed rifles?
  13. para1505

    Strelok Pro and DA

    It is reading my DA at 31760.0 What the hell is wrong with it
  14. para1505

    New Barrel in the Mail

    Compass Lake Engineering got my barrel out in 7 1/2 weeks (6 ARC) now if I could just get some damn brass
  15. para1505

    WTB 6mm ARC Brass

    Looking for 200 pieces of 6mm ARC brass
  16. para1505

    Buffer Weights?

    I'm building 6mm ARC, and I will be trying to squeeze all the velocity I can out of it. I did this once with a 6.5 Grendel. I used a adjustable gas block and a Tubb bolt carrier weight and was very successful with it. But Tubb has discontinued the carrier weight. So increasing the weight of...
  17. para1505

    Leupold RX-1600I w/DNA

    Is this a decent rangefinder ? For engaging out to 1200 yards
  18. para1505

    Suppressors Gemtech One

    If you are not using the quick attach lug mount do you really need to keep the spring in the suppressor?
  19. para1505

    Rifle Scopes Which medium range scope for 5.56

    Like title says. Want FFP scope . Looking at 2.5-10 pst gen2 I do have govx and expertvoice pricing
  20. para1505

    +2 inch gas tubes more velocity?

    How much more muzzle velocity do you get out of a 5.56 20 inch barrel with a + 2 inch gas port barrel
Top Bottom
Back
Home
Forums
Merch
Alerts