• RIX Storm S3 Thermal Imaging Scope WINNER!

    Thank you to everyone who particpated!

    See the winner

Search results

Search the forum Search Articles
  1. K

    SOLD Sold: Innorel RT90C tripod with MidwestOffroad Anvil 30 adapter plate

    All sold 3/23 Changing up my tripod setup around and have some stuff for sale. First Up: RRS Anvil 30 (has Rev D engraved on the bottom, I believe this was the latest version RRS released before the RRS-lock Anvil 30 ARC-- this Anvil 30 does not have the RRS-lock pin.) A few light rub marks on...
  2. K

    Precision Rifle Gear Question on RRS Anvil 30 R-lock tension adjustment

    Question for those that have used both the older non r-lock Anvil 30 and the new r-lock version... I have an older non r-lock version right now. The clamp tension on the rail isn't adjustable, but it can compensate for different rails somewhat as there is a wave spring under the nut. The wave...
  3. K

    SOLD AX AICS chassis, FDE, R700SA, Post-2014, RRS Arca

    Sold 2/13 Selling a post-2014 AX AICS R700SA chassis in FDE. I've used this for many years now on a 223AI that was used for target work and ground squirrel blasting. Still in very good condition other than minor marks in the cerakote around the magwell from inserting and removing mags and a...
  4. K

    SOLD ARC M-Brace mount, 34mm, 38mm / 1.50" high, 0 MOA

    SOLD 2/8 Have a like new ARC M-brace mount for sale, 34mm tube, 38mm / 1.50 high, 0 MOA. While this worked great on my old AX AICS chassis I recently changed stocks and ran out of cheek rest adjustment, so had to change mount height. Asking $225 shipped and insured. Don't really need any...
  5. K

    SOLD AXMC .308 and .300WM bolts and firing pins bushed by LRI

    Sold 2/26 Have 2x AXMC bolt bodies and firing pins that have been bushed and turned to 1.6mm / .062" small firing pins by LRI. One 308 and one 300WM, both bushed, as well as 2x turned down firing pins. 300WM bolt has about 300 rounds on it and 308 bolt has about 800 rounds on it. Never any...
  6. K

    SOLD 2x 30% off Vortex certs

    Both sold 2/1 Up for sale are 2x 30% off MAP certs for Vortex at Euro Optic. Was planning to use them for a 1-10, Impact 4000, or maybe 2 more Razor Gen 3s, but some other things came up that needed the money instead and now I won’t use these before they expire on 2/28/25. Asking $80/ea. I’ll...
  7. K

    SOLD ARC M-Brace rings 30mm / 1.26" high

    Edit 2/1: both sets sold. Recently swapped stocks on 2 rifles and these rings, while great on the old stock, were a bit too high on the new stock and weren't totally comfortable and the stock ran out of cheekrest adjustment so I swapped to lower rings. Rings are 30mm, 1.26 high. Both sets of...
  8. K

    AXMC SFP bolt shroud assembly question, same lugs as LFP bolt shroud assembly?

    Question for AXMC shooters that have the new factory AI small firing pin bolts or have swapped their LFP bolts to SFP bolts: I know the firing pin itself is obviously different, but is the firing pin shroud assembly (the part containing the safety lever that locks into the bolt body) the same...
  9. K

    SOLD MDT HNT26 SA folder with arca, like new

    Both sold 11/27 I have 2 MDT HNT26 chassis for sale, 1 R700 short action, 1 R700 long action. Both are folding stock with ARCA handguards, in bare carbon (black) finish. Both have been taken out about 4 times and used from prone and from the bench for load development, that's it. They are in...
  10. K

    SOLD SOLD: 2x ARC M-Brace mounts, 34mm / 1.5 high / 0 MOA

    BOTH SOLD 10/6 Have 2 mint M-Brace mounts for sale. Original boxes, instructions, and levels included. Both are 34mm, 0 MOA, 38mm (1.5”) height. Selling because I changed stocks and the new stocks don’t have enough cheekrest adjustment to get comfortable with the 1.5” height even with the KMW...
  11. K

    Optics Vortex Venom 3 MOA with Arisaka offset mount with low and high plates

    Have a Vortex Venom 3 MOA red dot along with an Arisaka offset mount with low and high plates. I had this on one of my air rifles for close in critter blasting inside the barn, but recently changed scopes to a LPVO and haven't used the red dot since. Everything is in excellent shape as I really...
  12. K

    Optics Burris Fastfire Mk3 3 MOA with Ruger MK dovetail mount

    Changing a few things around in the safe... Have a mint Burris Fastfire 3 with 3 MOA dot along with a Ruger MK dovetail mount. Bought everything new and it's been on my Ruger Mk3 Hunter for quite a few years now. Always worked great but recently decided to change things up and try a Vortex...
  13. K

    SOLD Foundation Genesis 2, dark distressed, Impact 737R inlet

    SOLD 4/30 Have a like new Foundation Genesis 2 for sale. I purchased this new direct from foundation, ordered and shipped February of 2023. Dark distressed, Impact 737R & Hawkins M5 DBM inlet, standard weight, right hand, with front picatinny rail. Was used for some load development, a few...
  14. K

    WTB WTB Autotrickler V1 controller

    Found a couple thanks to a couple of members here, hopefully it fixes my issue. Thanks! Asking if anyone out there can dig into their old spare parts box to help me out... looking for an Autotrickler V1 controller board. My modified V1 is acting up and not always accepting inputs from the...
  15. K

    RL16 vs H4350 at today's prices... What would you buy?

    Can’t make up my mind and figured I’d ask here. Years ago I switched my 6.5CM, 6 Dasher, and 22BR from H4350 to RL16, and now I’m also running a 22GT with RL16. When I first tested RL16 vs H4350 I found faster velocities, temp sensitivity was better, groups were as good or better than H4350…...
  16. K

    SOLD McMillan A6 stock, heavy fill, R700 short action, Hawkins M5 DBM

    Sold 3-3 This is a catch and release for me... bought this stock about 2 weeks ago here. Great stock, but I can't get used to the angled bag rider portion of this stock. All my other A5s, A6s, T4As, and TCS stocks have flat bag riders with butt hooks and when I use this stock I find myself...
  17. K

    SOLD 2x PT&G R700 SA M5 bottom metal

    Both sold 2/12 Was moving some things around today and found 2x PT&G R700 SA M5 pattern bottom metal sitting in a box. Both are still in very good shape and worked fine-- I just replaced them with Hawkins DBM a while back. Asking $95/ea shipped and insured. Payment via discreet Paypal F&F...
  18. K

    SOLD Manners T4A, R700 SA RH, elite carbon fiber shell, carbon high gloss finish, mini chassis

    Sold 4/15 Up for sale is a Manners T4A RH R700 short action, elite tactical carbon fiber shell, high gloss bare carbon fiber finish, standard weight fill (3.66#.) This stock has the Gen 1 mini chassis (the only mini chassis manners offered at the time it was ordered) and is in excellent shape...
  19. K

    SOLD 4x Triggertech Special triggers

    Have 4x Triggertech Special single stage triggers for sale. All are black housing with stainless curved triggers and in excellent shape. These will adjust from 1.0# to 3.5#. 3 have factory R700 style bolt releases (which can be easily removed), 1 does not have a factory R700 style bolt release...
  20. K

    Accessories Vortex 30mm / 1.00" high pro series rings

    Have a set of Vortex Pro Series rings for sale, 30mm, 1.00" high. Tried these on Dad's CZ455 but they weren't tall enough to leave room between the eyepiece and bolt knob for his thumb, went to taller rings so he didn't keep bashing his thumb into the scope opening the bolt. Mounted for an...
Top Bottom
Back
Home
Forums
Merch
Alerts