Search results

Search the forum Search Articles
  1. C

    Gunsmithing AR 15 barrel set back??

    I have a AR barrel that I could utilize if it was set back. In other words, cut the tenon off and rethread. This would move the gas port back toward the action. Meaning the gas tube would need to be shortened. The same amount that is cut from the tenon. Is this a acceptable practice??
  2. C

    AI Comp trigg adjustment

    Any one know where to find the instructions on how to adjust the AI Competition trigger?
  3. C

    Gunsmithing Custom Reamer

    Starting to put together my next project. Looking for some advice/direction. That way I don't screw it up from the very beginning. The build is going to be a AR15. 6mm Grendel, high end heavy barrel like a Bartlien. Probably going to run 95 SMK. I want to make up some dummy rounds that fit...
  4. C

    JP Rifles Grendel chamber?

    Any one know how long the throat is on JPs Grendel chamber? Any where close to being able to touch the lands from a AR mag? My guess is probably not. But thought I would check. The reason I am asking is, I am planning my first ground up precision build. Was thinking 6mm Grendel, having a...
  5. C

    6.5PRC seating stem #?

    Any one know the Redding VLD seating stem part # for 6.5 PRC? I don't see it on their chart.
  6. C

    Mechanical rest for load development??

    I personally have never used one. Always employed the thought that if I can not take it with me in the field then why bother. I would never even use a bench at the range. Always went prone for precision, because you can't take a bench into the field. As I become wiser (not older just...
  7. C

    6.5 PRC load data

    Thought I would share some info I have gathered working with my new 6.5 PRC. Plans are for 130 grn bullets and try some 140s later. So far it is a pleasure to shoot. Very little recoil, less than 308. And is a Lazer flat to 1k. Shot some Hornady factory 147s that chrono'd about 2850, which is...
  8. C

    Pistol Caliber pressure signs?

    Been loading rifle for along time, and feel very comfortable reading pressure signs. Now, getting started loading pistol (mostly 9mm). First thing I noticed in the loading manuals is that pistol loads are comparativly lower pressure than rifle. Which makes me wonder if they will show pressure...
  9. C

    Forming 7mm Creedmoor brass from 308

    The 7mm Creedmoor is pretty new uncharted teritory and not alot of info, so I thought I would share my experiance. For most that venture down this road the simple answer will be to use Hornady 6.5CM brass and simply run it through a full lenght die set up for 7CM. Simple wham bam done. Nothing...
  10. C

    Advanced Marksmanship High Angle Shooting Pics

    Got to spend the weekend with friends, shooting and enjoying some of Colorado's best. We started out with quick zeros and got some chrono data. Then set steel targets in the valley. After that was the hike to the top. We engaged targets from 250 to 950 meters, and angels up to 30deg. Three of...
  11. C

    Lead Exposure??

    What is the chance of lead exposure to me and my family during the reloading process? I only shoot jacketed bullets. I have a 18 mo old daughter who likes to "help dad". So i am concerned.
  12. C

    My Gap 338 w/ load work up

    GAP 338 Lapua, built on a Surgeon action 28" Bartlein Barrel McMillan Stock NightForce 5.5-22 MLR mil/mil Initial load work up. H1000 300 Berger OTM .001 jump Lapua Brass 215M primer Decided on 92grns. Although it did not look like it grouped well, at that point in the test test I was...
  13. C

    POF P308 ACCURACY

    Hi! wanted to seek the expertice of the members here, about my POF P308 16.5 inch barrel. The problem I am Having is it is very inconsitant, and averages 2MOA somtimes a little better somtimes alot worse. I have tried all kinds of factory match ammo with different bullets and grns. I have also...
Top Bottom
Back
Home
Forums
Merch
Alerts