Search results

Search the forum Search Articles
  1. A

    Stupid Question: Does the AT mag have a removable bottom plate?

    I was messing with the mag cause it won't feed worth a $hit and apparently I disassembled it. Looks like the bottom is one piece - is it or is the bottom plate removable? Cause I cant seem to put this back together...
  2. A

    New build - first non factory

    Just finished it, no time to shoot yet. I'm going to be severely disappointed if this doesn't shoot a lot better than the 6.5CM Ruger RPR it's replacing. Terminus Zeus MDT ACC Elite Bartlein 26" 6.5CM 1:7.5 by SPR 419 brake with suppressor mount Cykepod Gen 2 Razor 4.5 - 27 that I've been...
  3. A

    Anyone using the ARC m-brace mount with a hd 4.5-27?

    I’m in the market for a scope mount. I have a perfectly good working HD gen II 4.5-27 that I plan on using on a new build. Question: is the thickness of the mount hindering your ability to see the turrets?
  4. A

    Chasing lands

    So my 6.5CM has about 1800 rounds through it and the velocity has been decreasing lately. Same brass/primer/powder. With the Hornady 140 ELDM the CBTO was 2.258 and I was seating .020 off, or 2.238. It’s been a very accurate load. Today I measured and the CBTO was 2.293 or .035 difference...
  5. A

    Show me your MDT chassis with control / night vision bridges

    Killing time at work and waiting another 6 weeks for a barrel from bugholes. Show me your setups.
  6. A

    Bipod recommendations

    So I’m in the market for a bipod on a new build. I’ve really only used various Harris bipods before. I’m usually shooting prone out in the desert or off a bench at the range. I may want to try out a local PRS match eventually. accutac - heavy? Cyke pod? Atlas PRS? I’ve read through previous...
  7. A

    Terminus Zeus action / ACC elite chassis which mags?

    I know the action accepts AW, but still not sure If mags are chassis dependent. Can I pick up AW mags or stick with AICS, which I already have?
  8. A

    Questions on terminus Zeus QC

    So I know I'll catch some flack for stupid questions, but I'm going to ask anyway. I just picked up this action from my FFL and it had 3 baggies stapled together and two of them had screws - the third was empty. It looks like the set screws for the QC and the trigger screws. Are these supposed...
  9. A

    Can we discuss chassis? MDT ACC vs AI AT-X

    So I have an itch to build a long range rifle. I have a Ruger PRP in 6.5CM, Savage .308, and a savage 110 in 338LM. I generally shoot 800-1200 yards. I was looking at picking up a SA 700 clone with .308 bolt to drop in a chassis. I dont compete and I prefer prone to a bench, but if I wanted to...
  10. A

    6.5 creedmoor barrel how does it look

    I havent shot this rifle in a while. I lost round count around 1500. I got the itch to shoot it but wanted to take a look at the barrel. I know it's a crap video but outside of being super dirty do you see any issues. If you have a minute to waste, I'd appreciate it.
  11. A

    Suppressors Silencerco BOGO

    So about 7 months ago I took advantage of the BOGO promo and ordered an 30 cal can and I'm supposed to get the octane 9 for free. Initially the ads stated that it would be four months before the free cans shipped. I was curious so I just called to see if they were any closer to getting those...
  12. A

    What height rings? Ruger Precision Rimfire?

    with a 50mm objective? Medium?
  13. A

    Rifle Scopes Looking for suggestions on Rimfire scope

    First, I know nothing about 22s or the scopes that are mounted to them. About the only thing I know is that the parallax needs to go down to a minimum 25 yards. I just picked up a Ruger precision rimfire because I have an RPR in 6.5CM and I need a scope. I'm looking for something budget...
  14. A

    Rifle Scopes Set up focus on crosshairs or target?

    This might sound stupid but I picked up a new to me scope (vortex 4.5-27) that's a bit higher quality then the other scopes I have. It's perhaps the first time I'm noticing but I can either get 1.) the crosshairs crystal clear with the target in focus but not as sharp as it could be or 2.) get...
  15. A

    Rifle Scopes Vortex HD gen II 4.5-27 question

    I have a gen II Razor 4.5-27 in route. I'm putting it on a Ruger RPR in 6.5CM. I currently have a Burris XTR II 5-25 with Burris signature rings with the inserts. I'm in the market for rings and the obvious answer is Vortex/Seekins 1.45 but I dont know if they'll clear scope caps with a 56mm...
  16. A

    New Lapua brass bullet seating tension

    So I loaded some new Lapua brass to test in 6.5 CM. I ran them through a Redding FL bushing die to get the necks uniform. I then chamfered and deburred. When seating the bullets I noticed it took significantly more pressure to seat the bullet compared to the 50 pieces of Hornady brass I loaded...
  17. A

    Switching from Hornady to Lapua brass 6.5CM

    My current load with H brass is 41.6 of IMR 4451 and it shoots well. I picked up 200 pieces of Lapua brass and I know it's about 2.Xg less capacity. Has anyone that made the switch found out about how much less power it takes to get a comparable load with switching? I know I have to test but...
  18. A

    Trigger control with pistol grip on rifle

    I have a Ruger RPR and it has a pistol grip. It seems like I shoot regular stock, like an HS Precision, better than a chassis rifle. I'm a right handed shooter and normally I shoot with my thumb wrapped around the grip on the left (from behind the rifle). I feel like I'm either gripping too...
  19. A

    What do you think is the problem here...case head seperation

    So I had this happen today on 3x fired Hornady brass and it's unsettling. Most of my rifle reloading has been for .308 where I used standard dies RCBS dies. I never turned necks, used an expander ball, and FL sized only bumping the shoulder back .002. I had 500 pieces of LC LR brass that was...
Top Bottom
Back
Home
Forums
Merch
Alerts