Search results

Search the forum Search Articles
  1. Wile_Coyote

    6.5 creedmoor AR Only

    SAAMI says 62k psi and CIP is 63k psi. AR10 has nothing to do with it
  2. Wile_Coyote

    6.5 creedmoor AR Only

    Have you only tried this with IMR 4350? I am thinking of trying some 120 ELD-M 120's with StaBALL 6.5 this weekend.
  3. Wile_Coyote

    AR10 trigger pull weight adjustment?

    Late in on this one, but I spent a small fortune trying out different triggers. From my experiences... The Triggertech's are nice triggers. The offer a wide variety of options and have adjustable an non. Elftmann match triggers are nice as well and offer variety and afford some adjustment. AR...
  4. Wile_Coyote

    New item to try out

    Picked up an E-brake for my Nomad 30. The Xeno has been great as has the end cap. It’ll be interesting you see if there’s any difference with the e-brake. Will try on both an AR10 6.5 Creedmoor and a 6.5 PRC bolt gun. Anyone notice much with an e-brake?
  5. Wile_Coyote

    6.5 Grendel Barrels selection (late) 2023?

    I would take a look at Wilson Combat. The 6mm Creedmoor barrel I have shot really well. The are not bad at all for the price.
  6. Wile_Coyote

    Beginner - need equipment recommendations and advice

    OP, any of the presses you have listed will work. Take a look at kits if possible. They will have a lot of base items you will need. You can pick up the other items along the way. If by watching your money you mean getting started at a reasonable price, dont bother with the 419. While it’s a...
  7. Wile_Coyote

    6.5 creedmoor AR Only

    OK I got some numbers. I don't have H4350 for that barrel as I ran out and switched to StaBALL 6.5 on the Proof. I have a lot of data on H4350 in my 22" Ultramatch. Anyway, I was messing with 41g - 41.5g of StaBALL 6.5. I worked up from 39.6g in 0.3g increments 5 shot groups till I found...
  8. Wile_Coyote

    6.5 creedmoor AR Only

    I run a 22" Prood CF barrel on one of my AR10's. I have run both H4350 and StaBALL 6.5 in mine. I dont have exact numbers right in front of me as I am at work, but will check when I get home. I want to say that nodes I found were in the mid-upper range of the powder table(s) on mine. I usually...
  9. Wile_Coyote

    Suppressors *** NEW *** Otter Creek Labs Hydrogen L & S .30 caliber Suppressors

    Hey FuhQ, thanks for posting your info and experience. I just started looking for my next can the Hydrogen S will be on my list. I want to stay with the shorter cans as that is my preference. I know there are others that will say this or that is better or best, but preference on certain...
  10. Wile_Coyote

    CFE 223/AEM 5 dirty

    CFE223 with a can is really dirty. It leave black residue all over everything. Nitride BCG makes cleanup easier but still grungy.
  11. Wile_Coyote

    280 days later...

    First can I bought years ago on a paper file took about 190 days. I remember shaking my head that my clearances came back faster. The common go to excuse (and what is used a lot these days) is "we are seeing larger volume..." which is a crock. The backlog of paper seems to have been focused on...
  12. Wile_Coyote

    280 days later...

    280 days later and I can go pick up the Nomad 30 I purchased. Did a trust through SS this go around and it seemed to take forever.
  13. Wile_Coyote

    CFE 223/AEM 5 dirty

    I've only shot CFE223 in my Grendel, but found it to be really dirty.
  14. Wile_Coyote

    Feedback Scammer alert LADSNIPE beware

    That really sucks, sorry you hear your misfortune. I’ve only made one purchase here and it was for a moderately pricey item. Gentleman I dealt with for that was great no issue whatsoever. Looking for our leaving feedback here leaves a lot to be desired. You have to hunt for either. I’ve...
  15. Wile_Coyote

    Shoulder bump inconsistency

    Measurements may be bouncing around because it is only once fired brass. I just shot a couple boxes of new Norma in my 6.5 PRC, so new brass to form to my chamber (factory rifle so no drawing). Measuring as 1x fired resulted in the range 1.6450-1.6460. I measured a lot of Norma that has been...
  16. Wile_Coyote

    6.5 creedmoor AR Only

    Try here https://heavybuffers.com/ar10carbine.html
  17. Wile_Coyote

    6.5 creedmoor AR Only

    Weird that it only happens with 4350. That has been real stable for me. I am running the RCA HP BCG in my newest 6.5 and it works well. The other has a JP HP bolt in a toolcraft carrier, but even with a standard bolt it never left a mark or messed with a primer. I am not versed on sprinco...
  18. Wile_Coyote

    6.5 Grendel

    I have a lot of CFE223 so I use it but I’m not crazy about it. It’s dirty and a pain to clean.
  19. Wile_Coyote

    Opinions on the Ranier Arms Ultramatch Mod 2?

    I have an old Ultramatch in 6.5 Creedmoor purchased when I built my first AR10 a very long time ago. It’s function and performance has been great and still is. Matches the proof Carbon that I have on my other 6.5 AR10 with with the Ranier requiring less tuning. As far a Rainier goes, fighting a...
  20. Wile_Coyote

    6.5 creedmoor AR Only

    The spring and buffer will help, but can you adjust the gas? My first 6.5C AR10 ran like a clock with just an adjustable gas block. Still does. My second I had a 6mm Creedmoor that would give pressure signs at any loading. Swipes, craters, pierced and blown primers. And this was even with the...
Top Bottom
Back
Home
Forums
Merch
Alerts