Search results

Search the forum Search Articles
  1. Darkhorse1

    Expander Mandrels

    Only time this happened with me was when I was using the same mandrel on two different cartridges (both .264 bullets though), forgot to reset the die in the press for 6.5 sst, and it did the exact thing your pic shows due to the mandrel bottoming out. Doesn't sound like that's quite what is...
  2. Darkhorse1

    WTB Looking for a Forster Co-Ax

    Where are you located roughly, I have a zero coming and was debating on keeping mine or not. Mine is pretty new, but have been impressed with what Area 419 did so going that route. Hit me up if you want pics etc.
  3. Darkhorse1

    SOLD WTB MARLIN 1895 dark .45-70

    I can't help you on getting one, but have been looking for this as well. I think they stopped making it right? I've been looking for about 2 years now because I wanted a threaded barrel. I haven't asked a smith, but do you think they could thread one of the other models, or not enough material?
  4. Darkhorse1

    Accuracy international axsr twist

    I got it from EO but they said that the description is probably incorrect. I do have a spinning cleaning rod and bore guide but don’t know the trick. Assume you mark the rod and measure the distance it takes to do a full rotation?
  5. Darkhorse1

    Accuracy international axsr twist

    No, I pulled my barrel too and don’t see it marked anywhere.
  6. Darkhorse1

    Accuracy international axsr twist

    Does anyone know what the 300 norma twist is? I'm seeing 1:10 on MH, 1:8 on Euro, and the manual says 1:9:5.
  7. Darkhorse1

    Accuracy International AX Headspace Question/Concerns?

    Called Manson today, ships tomorrow. Thanks for the input!
  8. Darkhorse1

    Accuracy International AX Headspace Question/Concerns?

    I know this is an older thread, but I recently picked up an axsr in 300 nm and wanted go/no go (haven't shot it yet, but like to check prior). Only place I could find was PT&G (unless Forster etc. take custom orders which I may have overlooked). I've personally never had an issue on several...
  9. Darkhorse1

    Powder Splash With Auto Trickler & Area 419 Components

    Thanks, I basically started over with it and seems to be consistent now. I wanted to keep my front shield closed (ac causes issues with the scale sensitivity when it is on) and pull the cup from the right side. I'm still gonna tinker a bit with it, but haven't found a way w/o the cup hitting...
  10. Darkhorse1

    Powder Splash With Auto Trickler & Area 419 Components

    Can you send a pic of your current setup, I just put all of my parts together and getting all sorts of messed up stuff. The scale is reading the pan/cup at different weights consistently, and I don't have the same adjustment in the trickler which is causing significant over throws.
  11. Darkhorse1

    Accuracy International AXSR's are HERE!!

    So the longer throw didn’t mess you up? Or would you say the longer throw doesn’t impact performance unless you are in the top 5% of shooters? I’m definitely not in that group lol, but if it’s the case, might make sense to sell some stuff.
  12. Darkhorse1

    Garmin Tactix Delta With Applied Ballistics

    Mine seems to be a little off, but didn’t notice it previously as I don’t use the bezel for anything. As long as the tech and durability are there, that’s good enough for me since those were the primary reasons I bought it.
  13. Darkhorse1

    Accuracy International AXSR's are HERE!!

    I’ve got the same rig now, and have the.308 parts on bo too. I’ve got a nice prs setup, but would be interested in hearing from others who do this with the axmc.
  14. Darkhorse1

    Accuracy International AXSR's are HERE!!

    ahh ok so the axmc mags are interchangeable on it, just the new .308 mags are different for it not needing the spacer.
  15. Darkhorse1

    Accuracy International AXSR's are HERE!!

    Apologize for my ignorance if this has come up, but is there a different mag for the 300wm group of cartridges, or just using the 300 norma mags? I believe the 300 norma case is larger in diameter than the 300 win mag for example (so would the mag lips need to be bowed in etc), but can't find...
  16. Darkhorse1

    Tikka T1X

    So I put a 1/2” plastic spacer in and can get 12 in it. Seems to feed fine as well so will test it out.
  17. Darkhorse1

    Tikka T1X

    Here’s a pic sxs of oem and the extender.
  18. Darkhorse1

    Tikka T1X

    got mine today, seems the spring needs to be stretched from the start. How would you propose making the extension less capacity, just stick some cardboard in it or something?
  19. Darkhorse1

    Tikka T1X

    I took a look this morning at mine with OEM mag in, and I think it will fit as long as the width is the same as the OEM portion in the pic (which appears to be). This part sits inside the mag well of the krg. I think these will be awesome if they fit, not just because of the extra capacity...
  20. Darkhorse1

    Tikka T1X

    Looks like they have them up now. I'm gonna try them out. https://www.mkmachining.com/product/tikka-t1x-22lr-4-extension/
Top Bottom
Back
Home
Forums
Merch
Alerts