Search results

Search the forum Search Articles
  1. ocabj

    X - Vectronix Shooting Solutions

    For NRL Hunter, I make it a habit to unclip the binos when I come off the glass to go shoot, and in some cases, I will put the tripod on its side with the binos still clipped in so it can't fall over.
  2. ocabj

    X - Vectronix Shooting Solutions

    I'm no expert on optics, but I'm guessing the threaded portion is part of the tube, and tube was damaged, that's why it can't be repaired. I'm not sure how this would work for a scope, like if you were to dent the objective bell and deform it, would they be able to bend it all back and fix it...
  3. ocabj

    X - Vectronix Shooting Solutions

    I empathize with your predicament, but I think it's unfair to say the warranty is bad. It's a fair expectation that a warranty would cover defects from the factory and some parts failures from normal user and at the minimum every company will do this. Then we have a company like Vortex Optics...
  4. ocabj

    MDT ACC Elite

    Thanks.
  5. ocabj

    Calypso AB Mini Ultrasonic Wind Meter

    I didn't realize you also experienced the same issue where it would never re-connect. I also got my replacement just a couple weeks ago but I haven't bothered opening the box. It took forever and I had to reping them for updates every month.
  6. ocabj

    Rifle Scopes No Chance Optic Planet Ever Fulfills This Order

  7. ocabj

    Bipod recommendations

    I only recently discovered I could bend the pins. My single pull had a bent pin late last year and I didn't know why. Then when I was trying to adjust the legs at the range, I didn't realize I was already at the extreme end and when I was pushing out the leg, the pin bent. At the NRL Hunter...
  8. ocabj

    Triggercam 2.1+

    I no longer have the 2.1 as I sold it when I realized it didn't fit the ZCOs. However, from what I can recall from memory, the housing is the same dimensions. The ring clamping section has to be larger. The buttons are on the 'top' and the port holes for the focus ring and memory card are on...
  9. ocabj

    Zco mpct 2x reticle low power

    Bottom half is blurry because I handheld a camera behind the scope and it's not square to the optic. In any case, you should be able to get an idea of what the bottom vertical reticle looks like. It's just an extension of the thin crosshair and even numbers for MILs going down from 14 to 32.
  10. ocabj

    X - Vectronix Shooting Solutions

    Being in SoCal, I don't see cold weather much. But I was in Paulden for the NRL Hunter Pro-Am a couple weekends ago and it was about 20F on morning of Day 1 and high tens on Day 2. I had a Surefire 18650 in the Vector X without any issues (Nitecore cold weather 18650 in pack for backup). Both my...
  11. ocabj

    Triggercam 2.1+

    I haven't tried anything but my ZCOs. However, it comes with 8 sleeves, with the thickest one having an internal diameter of about 39.5mm. I'm going to guess the range is going to cover 40mm to 51mm or so. Back when TriggerCam had the spec page up, I vaguely remember they had a range that...
  12. ocabj

    Triggercam 2.1+

    I forgot about this thread. I got one a couple weeks ago.
  13. ocabj

    Garmin Xero C1 Pro chronograph

    I charge maybe every 6-8 range sessions, but I don't leave my Garmin on in radar mode for long periods of time. I will shoot a string and end the string, or I pause the string if I'm idling about.
  14. ocabj

    MDT HNT26

    Well, no need to thank me because I was doing it for me. LOL. But I did thank Matt personally because I ran into him as he RO'ed at the Mason Valley NRL Hunter match earlier this year.
  15. ocabj

    MDT HNT26

    I sent him my foreend late last year so he could make one.
  16. ocabj

    Triggercam 2.1+

    I emailed them last week asking for an update and did not get a response. Note that I asked them if they were ever going to make a Triggercam for larger oculars and they told me back in 2022 they were working on one. Asked for update in 2023 and they said still working on it. Then in 2024 asked...
  17. ocabj

    X - Vectronix Shooting Solutions

    I have a Marsupial Gear no-mag medium and a Stone Glacier Sentinel large. Fits in both.
  18. ocabj

    Calypso ultrasonic wind meter

    The charger that came bundled with it might not be working. It has an led around the entire top edge that lights up multiple colors when initially plugged in or when I place the device on it (upside down or foot down), but goes dark after it cycles the multiple colors a couple times.
  19. ocabj

    Calypso ultrasonic wind meter

    I got one of these today. Is the charger supposed to stay lit when you have the device on top of it? It cycles colors at first and then goes dark.
  20. ocabj

    X - Vectronix Shooting Solutions

    Does anyone know if a Kestrel HUD or E-Dope card works directly with the Vector X? I do not have any hands-on familiarity with either of those devices, but I was playing around with Target Card input system in the Vector X and it would incredible if it could continuously update an external HUD...
Top Bottom
Back
Home
Forums
Merch
Alerts