Search results

Search the forum Search Articles
  1. 3

    .338LM - .50 Cal

    heard good things about retumbo ...i should pick some up
  2. 3

    .338LM - .50 Cal

    i notice a few guys are reloading 250gr lapua scenars with h1000 @ 95gr to 96.4gr, i am currently loading 94.4 to 94.6gr of h1000, i am going to up a few to 95, 95.5, 96, and 96.4 and see where that gets me.
  3. 3

    reloading .338 lapua magnum data

    Re: reloading .338 lapua magnum data i dont understand why you guys are saying you are scared, after EACH time the powder is dropped into the brass, i take it off the press, and weigh the unit, making sure the charge is between 94gn and 95gn maybe i am missing something here, but i am sure...
  4. 3

    reloading .338 lapua magnum data

    Re: reloading .338 lapua magnum data you guys are a huge help. i will measure the magazine and seat the bullet .01in short my barrel is 27" (sako trg 42) i was looking through the hodgdon reloading data and they have min load as 90gn, and max load as 98gn for a 250gn hornady soft point...
  5. 3

    reloading .338 lapua magnum data

    Re: reloading .338 lapua magnum data i humbly ask that you refer me to some of the reloading manuals that you have come across
  6. 3

    reloading .338 lapua magnum data

    Re: reloading .338 lapua magnum data max charge for a 250gn projectile is 98gn (got the data from the hodgdon website i felt that 94-95 grains was probably safe no one has any powder in stock anyway...so i have to be precautions
  7. 3

    reloading .338 lapua magnum data

    Re: reloading .338 lapua magnum data ah thank you, good idea with the magazine as far as data: i prime the brass, weigh it, zero my scale, and load the charge. then i weigh it again (the scale will read out the change in weight) i jot the weight down ON the brass just for record keeping...
  8. 3

    reloading .338 lapua magnum data

    hi guys, new here but i engaging in my first attempt at reloading: SAKO TRG 42 Dillon 550B press redding dies Hodgdon H1000 Lapua Brass Lapua 250 gn Scenar so here is what i am doing: i used the 550 to neck size the brass (lapua), and seat the primer (Federal 215). i then remove the primed...
Top Bottom
Back
Home
Forums
Merch
Alerts