Can't find much info. Win brass cci magnum primers. 300 win mag.
I'm thinking start at 69 and work up to 72 grs. On the lands.
Thanks!
I'm thinking start at 69 and work up to 72 grs. On the lands.
Thanks!
Anybody loading 220 SMKs over reloader 22? 300 win
- Thread starter targaflorio
- Start date
Re: Anybody loading 220 SMKs over reloader 22? 300 win
Win brass annealed, Fed 215M primers, 72 grains of RE22,
3.50 COAL, ~.012 off the lands, 2812 fps at 50 degrees from Lilja 27.75" 3 groove 1:10 twist.
~12 min elev at 600 yards, ~28 min at 1000 yards.
Hope that helps.
BTW.....
70.7 grains of H4831SC provides the same stats.
Win brass annealed, Fed 215M primers, 72 grains of RE22,
3.50 COAL, ~.012 off the lands, 2812 fps at 50 degrees from Lilja 27.75" 3 groove 1:10 twist.
~12 min elev at 600 yards, ~28 min at 1000 yards.
Hope that helps.
BTW.....
70.7 grains of H4831SC provides the same stats.
Re: Anybody loading 220 SMKs over reloader 22? 300 win
69.5grs. of RL22 with a 220gr. bullet gets me 2775 fps from a 26.5" bbl. Not the fastest but is very accurate. I noramlly settle on the load that gets me really good accuracy instead of seeing if I can get a few more fps.
69.5grs. of RL22 with a 220gr. bullet gets me 2775 fps from a 26.5" bbl. Not the fastest but is very accurate. I noramlly settle on the load that gets me really good accuracy instead of seeing if I can get a few more fps.
Re: Anybody loading 220 SMKs over reloader 22? 300 win
Good news! I loaded 3 rounds each of 67, 68, 69, 69.5, 70, 70.5, 71, 71.5, 71.8, and 72 . Smk 220s over rl22 in win cases. should be a good first day. Merry Christmas!
Good news! I loaded 3 rounds each of 67, 68, 69, 69.5, 70, 70.5, 71, 71.5, 71.8, and 72 . Smk 220s over rl22 in win cases. should be a good first day. Merry Christmas!
Re: Anybody loading 220 SMKs over reloader 22? 300 win
Started getting flattened primers at 70grs. Hmmm...
Started getting flattened primers at 70grs. Hmmm...
Re: Anybody loading 220 SMKs over reloader 22? 300 win
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: REELDOC</div><div class="ubbcode-body">What OAL are you loading to? Did you back off the lands? </div></div>Coal is 3.54", ogive is 2.97" kissing the lands, ie when I chamber a dummy round I get one groove mark. So does it make sense to back off the lands a little and look for a bigger powder charge?
Thanks!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: REELDOC</div><div class="ubbcode-body">What OAL are you loading to? Did you back off the lands? </div></div>Coal is 3.54", ogive is 2.97" kissing the lands, ie when I chamber a dummy round I get one groove mark. So does it make sense to back off the lands a little and look for a bigger powder charge?
Thanks!
