assembly

  1. Jester8

    Gunsmithing Tubb Speedlock Assembly

    Was just wondering how much work is involved in putting one of these together for a Model 70 SA. The cocking piece on my winny broke about a month ago. I have the speedlock piring pin, and spring. Superior Shooting Systems site says that it is recommended a gunsmith install them, but I wanted...
  2. K_4c

    AR extraction spring assembly question

    I've never had to replace the extraction spring in any of my ar's but I've decided to replace all of them with new springs and D-fender rings. My question is.... How do you assemble the spring into the extraction tab??? I feel dumb for asking this easy question, but I wanna make sure that I'm...
  3. esromvre

    Gunsmithing opening for Badger assembly?????

    I need to know the differnce in opening in the bottom of the stock. dose anyone have a pic of one that has been opened and put a rem bottom metal back in? Just want to know what the differnce would be.. Thank you
  4. M

    Gunsmithing Value of a 40X old school trigger assembly

    I have an old school 40X trigger that I got for the tall safety to put on a M40 clone. Found the correct safety catch elsewhere so I have the complete trigger assembly left over. Figured that I would use it someday but haven't in several years so thought that I would put it up for sale. That...
    • MtGoat
    • Thread
    • 40x assembly school trigger
    • Replies: 5
    • Forum: The Armory
  5. K_4c

    Ruger SR 556? Bolt assembly?

    Anybody had the chance to put one of rugers new AR's through its paces??? looks like a pretty good platform... Also, what's the advantages of a chrome bolt assembly as opposed to a black matte assembly? I need to buy a new assembly for my RRA, where should I look first? lastly, I had my fair...
  6. S

    Gunsmithing AR assembly question

    When installing a new barrel in an upper, is it a recommended practice to use grease or anti-seize. Maybe loctite. Also the barrel nut. I have only seen a few, but I have seen one that was installed with loctite. All others had grease. This is the first time I have done this and want to...
  7. Am180man

    Will a DPMS 308 carrier assembly work in an AR-10?

    I was told that the bolt carrier assembly for DPMS' 308 will work in an Armalite AR-10. Is this correct? What about Knights SR-25 carrier assembly....will that work int he Armalite as well? Steve
  8. G

    Wyatt's .308 Detachable Magazine Assembly

    Now taking orders for our new DetMag assembly. Trigger guard assembly is machined out of billet aluminum, magazines are steel. Retail per unit is $223.00 and includes one magazine. Mags are 5 shot cap. Spare mags are $54.00 ea. Order at Wyatt's Outdoor, Inc. 4856 Pioneer Rd. Medford, Oregon...
    • gun-rx
    • Thread
    • 308 assembly detachable magazine wyatt
    • Replies: 29
    • Forum: The Armory
  9. Am180man

    Need an AR-10 bol carrier assembly

    Does anyone know where I might find a complete Armalite AR-10 bolt carrier assembly? Tried Armalite...no luck at this time. Can anyone help a brother out??? Steve
  10. W

    Suggested book/guides/advice on AR assembly

    I have several AR's 5.56, 204 & 6mm & want to understand how to switch out barrels, change handguards, tools needed, etc. safely & correctly. Any suggestions on specific how-to books or info here on the forum that has been posted earlier? Thanks.
  11. C

    bolt assembly

    I'm starting out with component parts to assemble a PT&G bolt. Have the extractor, ejector parts, and firing pin assembly. What tools are needed to complete? Is there a reference of how to go about it? First time assembling a bolt. Help is appreciated.
  12. JCH

    AR 223 bolt assembly

    I am not really into AR's but I bought a lower and a seperate upper that comes with the charging handle only (no bolt assembly) I wanna get set up before they are possibly banned. Question is...does anyone know where I can buy and new 223 complete bolt assembly for a DPMS 223 upper?
Top Bottom
Back
Home
Forums
Merch
Alerts