bedded

  1. W

    Accessories McMillan A6 edge carbon with full length arca

    A6 edge Bedded and painted by TS customs for impact 737r action. Full length arca. LOP around 13.5 inches. QD cups on the front and rear for sling mounting. DBM bottom metal. Also will include new Hawkins Hunter DBM and mag if wanted for 300 more. Will consider trade for MDT or similar ACC...
  2. T

    Accessories Remington 700 SA Hogue Pillar Bed Stock $85

    Hogue Remington 700 BDL short action for heavy barral. Stock is pillar bedded for accuracy and comes in grille green. Stock has seen one range day for about an hour before my Chassis system arrived. Asking for $85+ shipping stock sells for $159.95 from...
  3. S

    Has anyone bedded their Savage MKII

    I have one with at SSS stock and was wondering if It would be worth it to bed it out?
  4. L

    Gunsmithing Torque for piller bedded action

    being from a world of glued in actions (benchrest), I have never been concerned with torquing action screws. I have recently read that even with piller bedded actions it is recommended to torque them to 65 lbs. I have torqued my rings and bases for years and thoroughly understand the value...
    • Lburt
    • Thread
    • action bedded piller torque
    • Replies: 2
    • Forum: The Armory
  5. bdh308

    Gunsmithing Bedding a full aluminium bedded stock

    Hey guys. I bought one of the new Choate Tactical stocks which has the Vgrooved aluminum bedding block in it. Is it necessary to bed the rest of the rifle and if so which part of the stock and what kind of bedding would you recommend?
    • bdh308
    • Thread
    • aluminium bedded bedding full stock
    • Replies: 7
    • Forum: The Armory
  6. rc2125

    Gunsmithing Gap bedded FN SPR or SPR A3G

    For those folks that might have an FN SPR, and that have maybe sent it to GAP to have it bedded or it's an A3G model....... is there any bedding material foward of the recoil lug ("pad" under first part of barrel)? From what I gather'd, they do the bed jobs on the A3G models. I've read about...
  7. J

    Glass bedding a pillar bedded stock?

    I have a couple Savage 10FP's that I plan on glass bedding, one with a Duramaxx stock and the other with a laminated BVSS stock. Both of these stocks are pillar bedded, so are there any tricks/recommendations to bedding over the pillars? Thanks!
  8. Mgordon

    Gunsmithing Bedded my first scope base today

    Well, I went to mount a scope to my Remington 700 today and I used the indicating rods to check the alignment of the two piece Leupold base and rings. I dialed in the "windage" but realized that the rear rod was much lower than the front. So I clamped a 1" rod in the rings and isolated the...
  9. USMCj

    Gunsmithing Bedded my scope base! Step by step and Pics inside

    Let me start off by saying that I do not have a lot of experience when it comes to bedding, I learned how to bed a rifle by looking at Randys (HateCA) DIY page and by asking him a billion questions via e-mail (which he was more than willing to answer) I have since bedded 3 rifles, 2 bottom...
    • USMCj
    • Thread
    • base bedded inside pics scope step
    • Replies: 37
    • Forum: The Armory
Top Bottom
Back
Home
Forums
Merch
Alerts