dta

  1. lead ƒarmer

    SOLD DTA Desert Tech standard 473 bolt head

    If you've already got a magnum bolt assembly, pick this bolt head up and you can get started in the smaller calibers and save a ton of money. It is used but fully functional. Standard .473 right hand 308/6.5 Creed/260 etc bolt head. It's an extra from my SRS-A1. $40 shipped
  2. savageeaglenavy

    Rifle Scopes Which scope for DTA covert KAhles or March

    After a lot of reading and research in my opinion S & B have been replaced by the FFP march 5-40 and Khales 6-24. Both if these scopes have or are coming out with a MSR/ACR. I know this might ruffle some feathers but please give your insight on which is best and if there is another that is...
  3. J

    Suppressors The wait begins....DTA SRS w/ TBAC 338ba

    Entering the queue today! FDE Thunderbeast 338ba on my Stealth Recon Scout. The FDE TBAC is almost an identical match in color to the rifle. If the sound is half has good as this set up looks, I think I will be very happy. Going to run the 338 two port brake on both my 308 and 338...
  4. VKC

    1420 yds, My limitations with 6.5 Creedmoor

    So I shot my DTA SRS SAC 6.5 Creedmoor out to 1420 yards at a 12” wide chest-sized steel plate. I was shooting pointed 142gr SMK @2920fps. Out of 40 shots total, without excluding “sighters” etc, I made hits on steel with 18 shots. This calculates out to be a 45% hit probability...
  5. VKC

    Range Report SAC 6.5 Creedmoor DTA SRS

    Range report with Short Action Customs 6.5 Creedmoor Bartlein barrel and R&D brake. Pointed 142smk with 44.7gr RL-17 and CCI BR2. Here is my original post in reloading section for load development...
  6. VKC

    RL-17 (Alliant) for 6.5 Creedmoor

    Due to the lack of availability of H4350, I've been trying Alliant RL-17 for my 6.5 Creedmoor DTA SRS 26" Bartlein 1 in 8" twist rifle. I've searched this forum and multiple other forums about reloading data and found that most people are quoting a max load of 41 to 43grains with problems with...
  7. Guns4570

    DTA Accessories....what do we need?

    Hey guys..I have been looking at my DTAs and was thinking it would be cool to have another mag ready and the option for a monopod. Ok my only thought was since the bullpup elimnated the use of the stock pack, how about using Buffer Tech strap system or some adaptation there of to tie to mags...
  8. Guns4570

    DTA Custom Barrel and Extension

    I am playing with the idea of having a custom barrel and caliber made for a barrel extention for my SRS. So here is the deal..I want it to be ballistically as identical as the 338 as possible to 1K. So that smacks of 6.5 for me. What do you guys recommend...with a 26" barrel 6.5 Lapua, 6.5...
  9. Guns4570

    DTA SRS 338 with glass finally

    Received the Heritage from Scott at Liberty Optics. Now maybe I can get this going. Dillon 550b has a new caliber to load.
  10. Guns4570

    DTA SRS feeding test....

    I received my 338LM conversion late last week and wanted to mount up the barrel. So I read the manual on the steps; laid out the stuff in front of me with the right tools (torgue wrench from DTA and the integrated all in one tool kit). Set the timer and swapped the caliber in 57 seconds...
  11. Dsparil

    DTA type stock for remington action?

    is there one available by chance? bullpup
  12. Guns4570

    Which break/flash hider for the DTA SRS 308 barrel

    Guys, If I don't like the thread protector supplied by DTA on my .308 barrel for my SRS which break/hider would you install? BO FTE some custom one I am not aware of or what? I want a little length to it too. Thanks.