ejection

  1. K

    Suppressed ejection pattern

    Finally got my sandman s out of jail so threw it on my Noveske 10.5 and put in an h2 buffer. The ejection is erratic and most of them are going straight down or appear weak on the video. Anyone know what's going on with the ejection?
  2. R

    AR10: Occasional Jam

    I'm getting an occasional jam in my Armalite AR10 in .260Rem. This is particularly annoying when it happens during a match. The bolt goes back far enough to catch and chamber a round, but the fired case is not ejected. (images are a recreation of what happens) The equipment is: - Armalite...
  3. R

    New Armalite AR-10 Build: Ejection and Feeding Problem

    My 'smith finally got all the parts for my Armalite AR-10 in .260 Rem with a Krieger barrel. He ran a couple magazines of ammo through it for function testing (the Giessele trigger needed some tweaking to keep the rifle from doubling) and experienced no problems. So I took it to the range...
  4. C

    Anschutz ejection fix

    I just figured out why my model 10A ( 64 action) will only eject 30% of the time. I replaced the ejecter and the spring clamp. less than $20
  5. LoneWolfUSMC

    Gunsmithing More 700 Ejection Problems

    I have had this issue for quite some time. When I run the bolt as quickly as I can, I will sometimes have a case end up backwards in the ejection port. Originally I thought this was from the oversized turrets on the Falcon Menace. I had brass marks on the turret from cases striking it. I...
  6. D

    Gunsmithing Remington 700 ejection issues?

    I've got a new G series Remington 700PSS in .223 that I've just started playing with as a varmint rifle. The rifle consistently extracts the fired case from the chamber but then fails to eject the case out of the ejection port. The fired case ends up lying on top of the next round in the...
  7. Ryan797

    Gunsmithing Ejection issues ar 15

    after buying a new "flattop" upper for my AR i have found that it refuses to eject. i walked up to my back stop and safely fired a round while looking to see if the bolt would go back and it did not, so i had went on to empty the clip pulling the charging handle back each time. any ideas on what...
  8. popeyecop

    Gunsmithing Ejection problems

    I have a Rem 700 sps in 308. When i shoot 308 shells they eject fine, but when i shoot 7.62mm in it i have trouble with the bolt not turning all the way to stop before i start the rear ward pull. It comes to a stop then i have to bump it with the heel of my hand to get it to unlock. any advised...
  9. T

    Gunsmithing Curious ejection

    No big deal here, just a curiousity - My Rem700VSS (.22-250) usually doesn't eject its empties clear of the rifle. Tried a couple different ejectors and springs but the empty brass still ends up laying on the follower where I have to manually pick it outta there. I figured they are hitting...
  10. D

    Gunsmithing 6mmBR ejection

    Are there any tricks out there to make a M700 eject 6BR cases more reliably? Most of the time the cases just fall back down on top of the follower. Thanks, David
  11. 19Scout77

    Gunsmithing FN SPR WSM Ejection Issue

    Any tips on getting an SPR wsm action to eject further? When I work the bolt slowly if does not clear the port--when I JAM on it it goes about 1-2 feet. This thing ejects like a 70 yo man with prostate issues. Any help is appreciated.
  12. H

    Anschutz 64 ejection problem fixed

    Ejection on my rifle (Anschutz 64 MPR)was very poor, 1/3 of the cases exit properly on the right, 1/3 out the left side, and 1/3 just lay on top of the next shell, regardless of how fast or slow you work the bolt. This seems to be a common problem on this model, and is totally inexcusable on a...
  13. Captain Moroni

    Gunsmithing Savage ejection problems???

    Hey guys I have a problem with my savage not ejecting the brass it extracts just fine but then just drops it on top of the mag. the plunger seems to be working but maybe the spring my be weak? any ideas? Thanks Tucker