jumping

  1. Ibelieve1776

    Measuring CBTO With Hornady OAL Gauge Problem

    I have a 300 wm and changed from FC to WW brass. I had Hornady make a piece of brass from the FC brass when I first started using it which would give me a CBTO measurement of 2.996. Now after firing my WW I sent brass off to Hornady to make another piece for the OAL tool which is giving me a...
  2. T

    Rifle Scopes Is the reticle on your scope "jumping"?

    I bought a Shmidt and Bender PMII 3x12 with a 50mm objective lens that was assembled by Premier Reticles. On my scope the reticle jumps as I move throughout the magnification levels. Take a look at your own scopes to see if yours does the same thing. While looking through your scope move...
  3. J

    Jumping Berger 155 VLDs?

    Doh! I had a Homer moment and bought 3 boxes of Berger 155gr VLDs instead of the 155.5 BT Fullbore bullets. So, when loaded to mag length length these bullets are about 0.100" (yes, 1/10th of an inch) OFF the lands in my 308. Is there much chance of these VLDs working well for me with this...
  4. M

    Range Report Range results: Jumping 155s and Jamming 208s

    Was out getting in some trigger time yesterday. Using Frank's 10-shot standard has me rethinking 208s over W760 in a 1/12 factory barrel. 208s were pretty tight with 44.5gr RL15 in the past, out to 1100+ yards. I've been messing around with W760 to eek out more velocity, but accuracy went to...
Top Bottom
Back
Home
Forums
Merch
Alerts