mod

  1. O

    SOLD B5 black stock

    Like new b5 black stock $40 paypal shippedypal shipped
  2. D

    Hogue Over-mold Stock Mod - Pistol Grip Extension

    I have recently been getting into bolt rifle shooting. My first purchase was the Remington 700 AAC-SD. This rifle is fairly well known now on the forums so I will skip the details. I wanted to get the most out of the Hogue Over-mold stock. So far I have added a kydex cheek piece and bedded the...
  3. I

    new scssa [bham, al] match-500yd mod. f class 9/19

    Starting 9/19/09 we will be running a 2 x 500 yd modified f class match at scssa in birmingham, alabama [modified as [1] we do not have a pit, [2] shooters will take the 2 sighter shots on 10" steel plates and [3] we shoot all rounds per run & then score all shots]. i am working on getting wind...
  4. B

    REM 700 SA CUSTOM STOCK MOD PROGRESS.

    HEY GUYS, THERE WAS A THREAD AWHILE BACK ABOUT SOMEONE MODIFYING A STOCK. I REALLY DUG THAT ENOUGH TO TRY IT MYSELF, I STARTED THIS YESTERDAY AND HAVE GOT QUITE A WAYS, I GLASSED IT AFTER CUTTING THE GENERAL SHAPE AND NOW AM AT THE POINT IM USING A LIGHT FILLER TO FINISH THE SHAPE ON IT. LET ME...
  5. 11B-B4

    MK12 mod 0 or mod1? your take....

    Looking to buy/build one of these... I realize my opinions on them are different from yours. But I would love you to contribute your insight if you dont mind. Mod 0 Cons~ Heavier than the mod 1 Higher cheek weld due to the swan sleeve Pros~ More rigid I think than the Knights FF rail To me...
  6. bohem

    Winchester Mod 63

    I just got a 1955 M 63 from GunBroker. I'm very excited about it, the classic little rifle kinda "speaks to me" LOL Anway, are there some more mod 63 owners on here, any advice, tricks, tips, etc that I should keep in mind? I haven't owned or shot one before, I found one that was affordable...
  7. Brushout

    TAC MOD Stocks

    Has anyone got any experience with the TAC MOD stocks that Surgeon Rifles sells as an upgrade?
  8. U

    Why no e-mail wen PM'd? Is there a mod in da hous

    nothing has changed (for yrs) with regard to my e-mail address, preferences etc but I dont get e-mails anymore letting me know of a p.m.-help appreciated
  9. H

    Gunsmithing Remington M40 mod for Winchester floor plate?

    Hello again all ... I'm just starting a Remington short action build in .223 and am pondering what I want to do for a mag system. What I don't want is the woeful Remington 700 alloy floor plate. There are a few DM systems availabe in .223 and one is being developed here in Australia, but I was...
  10. mark5pt56

    CDI stock mod back and ready to rock

    Got this back from Jeff and I did the final fitting of the assembly in regards to the mag latch. It fits nice and tight, no wiggle at all. This is the 700P that had feed issues and I decided to go with this mod sooner than planned to correct it. Jeff is great to work with, answers the phone...
  11. mark5pt56

    Gunsmithing Hooper Ordnance bolt mod

    I sent it off to Hooper Ordnance for the 700 bolt mod, which included the Badger knob and three machine screws through the handle to the bolt body. Got it back and it looks great! It's a new 700P, haven't shot it yet, will be tomorrow though. So far I've added the mod to the bolt, Seekins...
  12. badkarma1985

    Mk12 Mod 1 Upper

    Looking to see if anyone could recommend a shop to build an Mk12 Mod 1 upper. Please let me know if you have any experiences with any smiths.
  13. Jester8

    Gunsmithing Bolt Stuck On Mod. 70

    Question for anyone that this has ever happened to, but I was dry firing just a little bit ago, click, cannot for the life of me cycle the bolt again. This is a model 70 SA. The bolt lifts parallel with the floor and then she ain't budgeing. I don't know if the firing pin broke, or the saftey...
  14. rc2125

    Anyone run a hvy barrel Savage mod 12 .243 with

    ...heavier bullets, like 105's? From what little info I have read, the 1in9.25 twist is borderline to slow for bullets over 100gr......or is that not correct?
  15. patches

    KMW Cheek Mod Thumb Wheel or Wing Nut??

    Hey guys- Is anybody making a thumb wheel or wing nut like adjustment for a KMW cheek mod stock. I have a McMillan A5 with the KMW and I have to use an allen wrench to adjust the stock up and down. The problem is when I want to pull my bolt out of the rifle at the end of the day I have to put...
  16. bohem

    1 piece base for Savage Mod 93

    I have a Model 93 and it came with a 2 piece weaver style base. Do 1 piece bases exist for it? I tried looking on Grafs and MIdway but didn't see anything.
  17. averageshooter

    mk12 mod 1 questions

    Hey guys I am thinking of selling my M1A national match and building a mk12 mod 1 AR15. I am hoping to get some information on best parts for the build and where to get them. Yes I know parts are very scarce atm but they can be found. Also what is going to be the best barrel length/twist rate...
  18. ashland

    Gunsmithing Mod 70 Trigger Replacement

    I'm replacing the factory trigger on my Mod 70 with a Jewell. Can anyone give me some instructions on this or direct me to a thread or website? Thank you.
  19. J

    Mk12 Mod 0 Trigger Upgrade

    Guys, Finally broke in my MK12 Mod 0 that I bought here on the board. I was waitng for my Ops Inc Can and stamp. Finally got out to sight it in. Was shooting Black Hills 77 Match and got several 1/2" - 3/4" groups of 5 @ 100 yards. But the trigger is really heavy. Was thinking of upgrading...
  20. sandmann

    Gunsmithing twist rate on winnchester stealth. mod 70

    Guys need some help i bought a new in the box winn. stealth .308 does anyone know what twist rate these came in? it is a stealth 1 could not find any info. Thanks Sandmann