quick

$300 USD SHIPPED All items are NIB. Selling as a package. -Lee Precision Classic Cast Single Stage Press -Inline Fabrication Tall Ultra Mount W Quick Change Base -Inline Fabrication #17 Quick Change Plate -Inline Fabrication Case Ejector System W Side Bins (Bin Barriers Not Included) Payment...

I think that im going to get both the 45 and 9 versions of the ti-rant. My local dealer has a group buy for 20% off and that seems to be about a cheap as they go. My questions are what are the cons to these cans? It seems that everyone either gets the osprey or the ti-rants. Is there any...

Hi, If I were interested in rebarreling a Remington 700, what other calibers will fit a 308 bolt face? Im guessing I could use 22-250 or 243 with that bolt face, but what others am I not thinking of? Thanks guys Short actions only

on the 3-15 NF scopes, what power does the reticle (NPR1) range at? It's not marked on the scope, so can I assume it's at 10x? And the small hash marks at .5 MOA?

Do all QD rings have a lever tightener? Or is there another ring that will come off the top of a PIC rail rather than slide off forward by a different means? I would like to swap 2 scopes and mounts on one rifle. I need one in 30mm and one in a 1". Thanks.

I want to be able to shoot on the 13th of June and my local gunsmith is telling me it will take at least a week to get the shit to replace my extractor. It is a Mag face and is not riveted but I gather that all can be installed is the riveted type....brownells and midway both have them but I am...

For those of you with the DT MTC turrets, I was wondering if the Heritage's turret works as a zero stop (does it only allow the two turns from your set zero up)? I've been ogling all the posts and have been through all the Premier site's stuff and didn't see a quick answer. I'm eagerly...

How long is your rifle (with your particular barrel)? Due to its kit nature, I'm having a few dramas finding its dimensions once it’s all together. I'm just after the extreme dimensions so I can start looking for a hard case while I await the various ordered parts to arrive. Thanks all.

Hiders, Had one of the new Zeiss 8x26 PRF's out this weekend, had a chance to work with it and show to a few visitors. My impressions: A nice-sized, handy unit. Fits in the palm of (my) hand. Only two buttons make it simple to operate. Came in the box programmed for meters; switching to...

I just got my scope and got it mounted this weekend have not had a chance to get to the range with mothers day and all. I noticed when I was playing around with it last night I took the caps off to see how much grease and goop it had under the caps after reading a thread where someone had said...

Firstly, is there anything as "the best quick release rings", or should I just not worry about them? This is the reason. Will have a Surgeon actioned 6.5X47L soon that will wear a 6-24 Zeiss, but I am going to run it in F Class as well. I would like to run a 12-42 Nightforce for when I shoot F...

I have an Anschutz Match 64. I just installed a 20moa base from Rinfire Technologies. I got my Vari-X III 6.5-20x40 1" tube EFR back from Leupold and mounted it using some Leupold medium height QRW quick release rings. I know the 1" tube limits the available elevation adjustment. I bought a...

How does the mark 2 compare to a Vari-X III? I found a used Vari-X III 6.5-20x40LR I could buy for the same price as a new Leupold Mark 2 Tactical T1 Rifle Scope 6-18x 40mm Adjustable Objective Mil-Dot Reticle Matte. Both are about $500.00. Which would make a better choice? I am not very...

I recently built a 6.5x284. I have a Benchmark barrel on it and it still copper fouls quite a bit. I currently have 160 rounds through it. It shoots very well but I hate the fact that it fouls so much. Is this just the result of the caliber. I have had other barrels and they have cleaned up...

I have spotted 2 scopes for sale, and probably need to move on one before it sells. One is a leupold VX III 6.5-20x40 LR. The other is a Bushnell 4200 6-24x50 Tactical. Both are simarly priced. After reading several posts lately about Leupold quality slipping this isn't as easy to decide...

Which is more important, mounting the scope as close to the rifle as possible or having a larger objective size? At what point does having a larger objective size not pay off?

any of you guys tried to modify your stocks so the buttstock would be a quick detach type? been thinking it might be kind of a neat little project. i'd love an AICS but can't afford one.

what is the best powder measurement tool out there I have heard of quick measure and want to know if there worth the $300 inveastment or am ter off just weighing each load on the acculab 123?? Thanks Bill

A real hunter at work!

I got my rifle back from GAP, they put a PTG bolt and a couple other things, everything looks AWESOME! I went to mount my Falcon Menace scope, and the bolt hits. I could have gotten higher rings, but with my stock and pad the current rings are about perfect. So, I decided that I would create...