reloader

  1. sandwarrior

    Reloader 17

    I was just load testing Re-17 in my 6mm Rem (24" barrel) Reunning 90 gr. Speer SP/FB's up to 3500 fps. I started with the load I normally use for the 95 gr. Berger which is 45.5 gr. of H4350x. So, starting at 45.5 and working up in .2 gr. increments of two cases each level. I went up to 46.7...
  2. N

    reloader 17 density per cc

    I haved called around to allient and Lee but still can not get any info on re-17 vmd. I haved worked up so far to a 4cc dipper to test max load in a 22in. savage 30-06 w/180 interlocks but stoped their (no pressure signs but stout recoil) I sure Im over printed max of 54.5g for ~2750 fps with...
  3. Rich Emmons

    anybody here Gunsmith Reloader Certified thru PSU

    I was trying to figure out how or if i could get my FFL license mainly to buy reloading components and gun parts cheaper and ran across this site. http://www.certifiedreloader.com/frequentquestions.html "with there certificate you can buy WHOLESALE from all distributors and factories."...
  4. WolverineAtWork

    Reloader 10X Load Data

    Ok, reloading manuals and the interweb are scarce on information for Reloader 10X powder. Anyone w/ the latest greatest reloading manuals have any load data for RL10x .223 in 55gr FMJ, 60gr & 62gr projos? Thanks.
  5. Mag 300

    looking for reloader 25 nothern Illinois ??

    anyone know of any local to say 40 miles west of Chicago
  6. T

    Looking for reloader 15 and H4831sc

    Does anybody have any R15 and H4831sc that you will sell or trade for something? One pound of each will tide me over. Thanks for the help.
  7. Fredo

    Ca. Reloader 25

    Check your stores, a little just got in to Central California.
  8. E

    Reloader 17 and .308 win

    I'm not sure if I made a mistake when ordering my poweder or what I did, but I ended up with 8 pounds of Reloader 17, that my intention is to load .308 win 150gn Sp. I can only find one recipe and niether of them are from a book. The one I found was from alliant powders own wen site...
  9. D

    Reloader 17 with 105 grains bullet in 243 win

    Has anyone tried this powder in the 105 grains bullets (Scenars and AMAX)? Got the article from 6 mmBR, but they only go up to 100 grains bullets. Any help is appreciated.
  10. barrysuperhawk

    300 Win Mag, new reloader, advice?

    A good friend of mine just had a Winchester 300 win mag rifle given to him by his dad. When he went to look at ammo, the sticker shock bout killed him and his first call to me was "teach me to reload". So, we have him set up with a single stage press, dies and goodies are on the way, as is a...
  11. R

    260 results with Reloader 17 & 123 Lapuas

    Guys, I got a chance to shoot some loads with R-17 and the 123s. I had shot a load of 43.5grs across the cronograph a couple of weeks ago an it averaged 2990+fps with the 123s. Because we were shooting a bunch of loads across the crono at the same time I didn't get a chance to check the...
  12. L

    Reloader

    Just got e-mail and notification of r15 in stock at Natchez. product number HPREL155 ALLIANT POWDER RELOADER 15 5# In Stock $89.99 Hurry guys and gals!
  13. The Mechanic

    Reloader 15 for gas guns in .308 and .223

    Would Reloader 15 be a good choice as a combo powder for gas guns in .223 and .308? was wanting to see if there is a decent powder to use for both
  14. JRWALLSIII

    Reloader 22 in stock

    I had some reloader 22 backordered at Powder Valley. It just shipped today. Natchez also got some in stock today as well.
  15. 3

    338 Lapua Magnum and Reloader 25

    Could anyone using Reloader 25 in the 338 LM give me their starting loads and it's velocity? Thanks!!!!
  16. Turk10mm

    Brand New Reloader - and I can't even start!

    So, all my reloading gear has either arrived or is arriving. I've got 300 federal match 308 cases tumbled and half way prepped. I've got powder, bullets, and just about everything..... except some damn PRIMERS! I can't find anywhere in Houston that has primers. This is rediculous. I live...
  17. JRose

    Berger 185 VLD's and Reloader 17

    I have a pretty good load for my 10FP using 185 VLD's and RL15, but I bought a pound of RL17 to try out and plan on loading some test rounds up tonight. Savage 10FP w/ 22" 10 twist barrel Lapua brass Fed 210M primers Seated on the lands I'll prolly start @ 44gr, and ladder up to 46 as long as...
  18. vinconco

    Reloader 17 in 30-06

    Anyone here ever try RE-17 in a 30-06? I just gave it a workout this past weekend using my 700 LA 26" RockCreek M24 11.25 155 scenar 59 RE-17 Fed 210M 3185 fps SD 6.1 5 shots .395 moa 100 yds I worked up to this load .5 gr at a time and actually got it up to 3230 but backed off when I...
  19. C

    Reloader 15 for .243 Win.

    I am wondering if anybody out there has some loads for RL-15 using lighter weight bullets. My twist wont stabilize much over 75gr and have been getting really good results pushing the 58gr V-max molys with varget. I just cant seem to find much out there for 55-70gr with the RL-15, 70gr and up...
Top Bottom
Back
Home
Forums
Merch
Alerts