reloading brass

  1. fwvanhook

    Ammo NEW 270 WSM UNPRIMED BRASS IN UNOPENED BAGS.

    I have 3 unopened bags of Winchester 270 WSM UNPRIMED BRASS. $75.00 per bag. Shipping on 3 bags is 24.75. Shipping per bag 18.40. Can accept PayPal, Zelle, Venmo or CashApp
  2. brycemiller34

    Reloading Equipment Lapua 6.5 Creedmoor LRP Brass (1087 Pieces)

    1087 pieces of Lapua large rifle primer 6.5 Creedmoor brass available. All once fired from the same lot of Berger 140 Hybrid Target factory ammo. Separately bagged in 100 round bundles. Located in Phoenix, AZ area for local pickup or can ship to your door. $800
  3. Max_The_Phoenix

    6.5 CM fireformed sized brass doesn’t chamber

    Hi I have strange issue with my 6.5cm rifle. My fireformed brass chambers easily But resized using SAC FL sizing die wont. (No expander, 287 bushing) I tried Hornady match grade bushing die as well. I have to bump the shoulders back about 0.0045 (1.4845)in order to chamber the sized brass...
  4. Daerr

    Reloading Equipment (SOLD) 1100+ Rounds Once Fired MK 248 MOD 0 Brass (SOLD)

    I have 1100+ rounds of once fired MK 248 MOD 0 brass. Head stamp is FC13. Don't have time to process, asking $500 for the lot or will sell in batches. ≥250 (.70 rd) ≥500 (.60 rd) ≥750 (.50 rd) Shipped USPS priority to your door. PayPal or Venmo accepted.
  5. AIAW

    SOLD Peterson 300 Norma Magnum Brass - New

    100 pieces (plus roughly 35 additional, some primed I will throw in). All new, unfired. $210 shipped. I accept PayPal, Venmo or Zelle as payment options. Thanks.
  6. AIAW

    SOLD Nosler 300 Win Mag Brass - New

    Shoots really well. I get about 16-18 reloads on it before the web expands to a hard bolt lift. Too lazy to use the collet die on it after that. 124 pieces total. $175 shipped. I will accept PayPal, Venmo or Zelle.
  7. AIAW

    SOLD Lapua Brass - 338LM - New

    Continuing my clean-up and sell-off. 100 pieces "limited run" headstamp, new. $255 shipped (these are true Lapua cases, identical specs and dimensions - just a cancelled contract run a company paid to have a custom stamping on the head). I accept PayPal, Venmo or Zelle as payment. Thanks!
  8. Tshootz

    Accessories Whole Bunch of Stuff

    First for sale post so if I did something wrong please let me know! I have a whole bunch of stuff I'm looking to sell. I will update the post as items sell. Not really looking to trade for anything, but willing to negotiate some on the prices. Prices do NOT include shipping. 300x Alpha 6.5...
  9. K

    Reloading Equipment Hornady 6mm Creedmoor Brass (1x fired)

    I have 700 piece of once fired Hornady 6mm Creedmoor brass. All was factory 108 grain ELD-M. Willing to sell either as a whole lot or just piece some of it out. Below is a price breakdown. I am willing to do a bit of a better deal for the bulk purchase. 100 Count - $60 shipped 200 Count -...
  10. msting22

    SOLD FS .308 reloading starter kit

    I sold my .308 bolt gun so no need to keep the reloading supplies. This package will be a great start for anyone looking to reload .308 and it includes the following. 5 New bags of 50 Winchester brass (qty 250) RCBS F L Die Set and shell holder 304 - 168gr. Sierra Matchking Boat tall Hollow...
  11. NodakBarbarian

    Primer pocket prep and stainless media

    I was wondering what y’all do for primer pocket preparation of your fired brass after it is wet tumbled with stainless media? I just purchased a set up to wet tumble. So going forward do I need to do anything with the primer pockets of my Lapua brass now that it’s squeaky clean? Are there any...
  12. J

    Expanding case mouth with Lee FL die after priming

    So I bought some new brass online and got it all primed up and ready to load and the first bullet I went to seat got cut up pretty good. Upon further inspection, the case mouth I.D. was reading 0.220 or 0.221. I ran one of my once fired cases through my full length sizing die and took a...
  13. G

    Hornady match dies 6.5 PRC

    I’m having trouble with my set of Hornady match dies. The only way to get -.002 on a fire case is to have the die so far down that it’s chipping the teeth on the Hornady lock and load bushing. I’m running a .290 neck bushing with .002 neck tension with once fired Hornady brass. Any ideas? Thanks
  14. R

    Making 6mm Creedmoor from 243 Win?

    Title says it all, I sold my 243 and picked up a 6 Creed and now have quite a bit of 243 brass and a growing number of 6 Creed brass. Is is possible / worth it to resize from 243 to 6 Creed? If anyone has done it, I'd love to hear what you've done to make it work. I assume I would need to at...
  15. S

    Reloading Equipment 308 Win Brass

    I have 3 bags of 308 Win brass which I have wet tumbled prior to listing. The following is what I counted: Bag 1 is 226 pieces of commercial brass. The large majority is FC (Federal) and SSA headstamp. There may be a few other mixed in, but that's mostly what it is. Bag 2 is 337 pieces of...