scope mounting

  1. LongRange98

    Optical weirdness?

    Good day all, I noticed after mounting my Zeiss lrp s3 that the windage part of the reticle appears to be curving on the ends? The scope is currently on the middle of its travel & I’ve never seen this in any other scope any thoughts? Thank you.
  2. ZackW

    One-piece bases for PRS/NRL

    I’m just starting to dip my toes into the long range/PRS/NRL hunter world. All of my hunting rifles have either talley or dmz one-piece base/ring setups. I’m planning to get a scope with a 34mm tube and will need some new rings. All of the setups I’ve seen online run a pic rail and rings. I...
  3. LongRange98

    Scope and rail are too close, problem?

    Hello all! ,I mounted a Zeiss V4 to my ext mountain tactical rail but the objective comes bloody close to the rail. I Filed off some material so I’m able to get a thick sheet of paper through. Is that good enough? Or will the recoil cause them to touch? Cartridge is .308, thank you.
  4. Pink_Mist

    Eotech Vudu 5-25X50mm main tube length??

    Hello, I am hoping that someone with a Vudu 5-25 can help clear up a question. What is the main-tube length. I need to choose a mount that will fit. Eotech did not include this dimension online. I am leaning towards a ADM Recon with the minimum height required to mount on an AR platform.
  5. R

    Rifle Scopes Scope Mount Advice for Bergara HMR PRO w/ Vortex Viper PST 6x24x50

    Hello, I am new to the forum and long range shooting. I was wondering if I could get some advice regarding hardware to get for mounting a scope. Here is a summary of my situation: Rifle: Bergara HMR PRO chambered in 6.5 Creedmoor. Receiver has 8x40 threads. Scope: Vortex Viper PST 6x24x50...
  6. bonesaw00001

    Recommendations - Scope Mount for Tikka CTR with Viper PST Gen 2

    Hi y'all, Hope it's not too much of a pain to ask, given the plethora of posts on scope mounts, rails, and rings, but what would folks recommend as a best mounting option for a Vortex Viper PST Gen 2 5-25x (30mm tube -...
  7. stintedAIR

    Rifle Scopes Trying to 'understand' what scope mount to use

    This is the first high end scope I've mounted on a rifle. The scope is a Schmidt & Bender 3-20x50 PMII. For reference, the diameter of the objective lense with a scope cap is just over 60mm. It's going on a Daniel Defense DD5V5. I've done countless searches, and it seems like everytime I find...
  8. U

    Rifle Scopes Lapping Cheaper Scope Rings

    So I've been doing a lot of reading and lurking and picking up a lot of useful info. So a big thanks to everybody on the forum. But along with reading I've been doing some thinking, and couldn't find any posts on this topic. I've been reading about scope lapping and think it seems a good...
  9. E

    New to the forum and Savage Model 10 FCP-SR question.

    Hello everybody, I'm new to the forum. I have a question about mounting a scope on the Savage 10 FCP-SR. I have a Vortex Viper PST 6-24X50 scope. I need to know what mounting base and rings to get to mount the scope on the Savage Model 10 FCP-SR. Thank you in advance for your...
    • Eric338
    • Thread
    • new member savage fcp-sr scope bases scope mounting vortex 6-24x50 pst
    • Replies: 5
    • Forum: Bolt Action Rifles
  10. ridein4life

    Rifle Scopes 30mm scope rings on Savage FCP-SR

    Hello, im new to the board and am on my first build. ive read threw the forum for many hours and hears what i decided to start with. Savage model 10 FCP-SR .308, with PWS PRC muzzle brake and a Viper PST 6-24x50 FFP with EBR-2C Reticle (MRAD) or EBR-1. any advice on good quality scope rings i...
  11. B

    Rifle Scopes Scope Mounting Location on AR 15

    I have a Daniel Defense v5 .223 with M4 12" free floated handguard. I mounted Vortex PST 6-24x50 SFP on American Defense Ad Recon 30 mm mount with std 1.5" height and 1.9" cantilever with QD Lever. I mounted front of mount on rearmost slot on hand guard rail and rear part of mount on receiver...
  12. elfster1234

    Rifle Scopes My inexpensive way of leveling scopes when mounted. (with pics)

    I recently had to re-mount & level my 1-4 vortex scope on my DPMS 3G1, so I figured I would share my technique for making sure your scope is 100% dead nuts level. I'm not saying this is what you should do, this is just what I do to make sure my scopes are tip top. You will feel a little play...
Top Bottom
Back
Home
Forums
Merch
Alerts