vld

  1. Dr. Davy Jones

    SOLD 450+ bullets for $100 Shipped! - Hornady, Sierra, Barnes

    Berger 175 grain VLD Hunting- partial box of 79 185 grain VLD Hunting- partial box of 53 $65 shipped SPF**** Hornady 165 grain BTSP Interlock - unopened box of 100 165 grain BTSP Interlock- partial box of 75 178 grain A-Max- partial box of 79 208 grain Match- partial box of 58 $75 shipped...
  2. Dr. Davy Jones

    SOLD SPF Berger VLD 6mm 105 gr Hunting

    Have a partial box of 78 I don’t need. $40 shipped
  3. M

    243 Win. Loads

    I am looking for some advice on loads for my new 243 Win. I would like to shoot 105s, maybe 115 if my 8 twist will stabilize that bullet. Figuring on probably shooting the 105 VLDs. Any reloading experience with this would be greatly appreciated. Thank you
  4. obilly

    bullet shape question

    I have had this question since training day 3 Norfolk VA. but never wanted to ask it because it seems like a dumb question. That said I have used a number of surreptitious means to answer the question with no successes. So screw it, say what you will I'm damn curious… Why does everyone...
  5. savageshooter623

    Berger 210 vld for a .308

    Just picked me up a box of these bergers for some long range shooting and am having trouble finding load data for them. Anyone have a recipe and the resulting speed? For reference I have a 24 inch 1/10 twist barrel and typically use IMR 4895 powder. Im not stuck on it, but in these times, Id...
  6. B

    Berger Hunting VLD's

    I worked up a load with 155gr Berger VLD's for my 308 and it is shooting very well. I would really like to use them for hunting (deer) but I am worried about their performance. Do any of you have experience with these bullets on deer? I'm shooting them at a little over 2900fps.
  7. Center Mass

    Berger 7mm 180 VLD's

    I can't find them anywhere and I'm sure I'm not the only one. If anyone has a line on them or has some extra's they don't need/want, let me know. I'm only looking for 2 boxes or so. Just enough to run my 7wsm out to +/- 1500yds a few times. Thanks for the help, CM
  8. Tactical30

    VLD or not

    Does it matter if you use a VLD chamfer tool or a regular chamfer tool? Im loading for .223 (AR15), .300 Win. Mag. I have been using the regular one that fits on the RCBS trim mate.
  9. T

    300 saum and berger 190 vld's

    I just ordered some berger 190 vld's and was wondering if anybody has good loads worked up that I could try out for 300 short action ultra mag (saum). I have reloading manuals so I don't need references to the books just powder/primer/coal recomendations would be nice. I am currently using a rem...
  10. S

    Help-- need a VLD Magzine bolt stop..or 2 or more

    Anybody know where i can get ahold of some of these? DPMS doesn't offer the VLD magazines anymore...?
  11. ChadTRG42

    7mm-08 with 180 VLD- doable?

    Can you seat a 180 Berger VLD in a 7mm-08 case to about ~2.840"-2.860" and the ogive not go below the case neck? I was curious if this would work feeding from an AI mag and the bullet be out far enough to touch the lands and still feed from a mag?
  12. T

    185gr Berger VLD in .308 Win Load?

    I've been looking everywhere for this, anyone happen to have any of their own? I'd be interested in the 190gr as well. Thanks
  13. rockybrashear

    berger 190 vld loads

    hey im looking for loads for 190gr berger vlds that will work with my 30 inch savage 300 win mag target rifle.
  14. G

    Howa 30-06 and Berger VLD?????

    Hey Guys I have a Howa 30-06 26" barrel 1-10 twist. I'm starting to reload and I use this gun for Hunting and wanted to load VLD's thinking of 180 grain not sure on components to go along with? I have serched around but not much on VLD's and 30-06 Thanks GMAC
  15. USMCj

    Grafs has Berger 7mm 180gr Target VLD's in stock

    http://www.grafs.com/product/225480
    • USMCj
    • Thread
    • 180gr 7mm berger grafs stock target vld
    • Replies: 16
    • Forum: Reloading Depot
  16. GardDog

    Berger 210 VLD in 300 WSM

    I've made some upgrades to a Rem 700 SPS Varmint (26", 1 in 10" twist) I bought in 300 WSM. I am looking to work up a load for Berger 210 VLD BTHP. My search of the powder and bullet sites came up dry. My reloading manual has 300 WSM loads for 200 gr and 220 gr bullets, but nothing for 210...
  17. J

    168 VLD load advice

    I have been working with the 168 VLD 2.830 OAL in my remington VTR and I shot 3 shot groups from 42.5 grains to 45.5 grains of ramshot tac in .5 increments. The 43.5 (2615 fps)grain group was .5" with both surrounding groups about 1 inch and having the same center poi. The 45 grain (2720...
  18. ohiogunnut

    7mm 180gr Berger VLD Unobtanium?

    Any idea where I can find them in stock. I have checked Grafs, Midway, Midsouth, Natchez, and Cabelas with no luck. Any help greatly appreciated as I got a new Remington and need something to feed it! Thank you! Curt
  19. USMCj

    7mm JLK 180gr VLD, anyone using them in 7WSM?

    Do these really have a BC of .735? Sounds unreal! Anyone have luck with these in a 7WSM? and how do they compare to Bergers 180 VLD? http://www.swampworks.com/jlk/JLK%20Bullets.html
  20. beretta989

    6mm 95 Grain Berger Vld loads

    Does anybody have any loads for 95vlds for 6mm remington. I have a 40x in 6mm and havn't found any loads to start with.
Top Bottom
Back
Home
Forums
Merch
Alerts