working

  1. S

    Berger 105VLD seating depth?? What working for you

    I am loading for a 6 dasher and i am looking for some general seating depths for the 105vld. I know each barrel is different, but i didnt know if some of you guys have found a trend with the 105's? My records are showing that 15 into the lands is to much. I am having some good results at 5thou...
  2. J

    Which action for working gun??

    Gonna be rounding up parts for another build and was thinking about which action to use , I've fondeled the hell out of the Badger M2008 action and realy liked it , very heavy and rubust but I've never used one on a completed gun so I can't say how whell they cycle rounds. I used a couple...
  3. K

    155 Scenar not working out

    Ok. Here is the problem. I have been shooting long range practical shooting for quite some time now. When i started I used the 175SMK with great results Lately I have been shooting the 167 Lapua Scenar (got a serious deal om some factory ammo) But I had allways wanted to try the 155 Scenar. The...
  4. F

    Working up loads

    I am in the process of working up a load for my 308 spsv. I am using Win brass, 210m, re-15 and 168 amax. I was going to start with 42.5g,42.7g, 43.0, 43.2, 43.5 and so on to 44.7. Is this a good start or should I start a little higher with .5g increments? Also what is the norm for number of...
  5. MLC

    Working up a load IMR-4064/185 Berger non-VLD

    I'm trying this combination out with 210M's and Winchester brass at magazine length with a 10 twist barrel. I've loaded 42.5-44 grains in .5 grain increments. Has anyone used this combination?
  6. C

    Rifle Scopes working towards hi end scope

    i been toying around the idea of moving, to up grade my scope,just wanted some more input,,i got a savage model 12 fvss 300wsm,,seems to be a good shooter for the money,,im upgrading the stock,,,got a a2 stock comming and i upgraded bolt,got a rail and burris extreme tac rings,,,i have a millets...