-
Having trouble using the site?
Contact support
155 /Benchmark ?
- Thread starter Emilio
- Start date
-
- Tags
- 155 or benchmark
Re: 155 /Benchmark ?
Emilio,
I've worked up some loads with Benchmark for 155 Lapua Scenars but unfortunately have yet to find time to get to the range to try them out. I started out with 43.5 grains of Benchmark and worked my way up to 45.0 grains, in 0.5 grain increments. Once I try them out, I'll post my findings here.
03psd,
As for my other .308 load with Benchmark:
42.0 grains of Benchmark
168gn Sierra Match King HPBT-M (Moly coated)
Lapua Brass with headspace measurement of 1.631"
CCI-BR2 Primer
OAL = 2.800"
5-Shot Grouping: Consistent sub 0.5 MOA at 100 yards
My rifle:
Remy 700 XCR Tactical Long Range (26" barrel)
I've found that the Benchmark powder meters very well in my RCBS Uniflow Powder Measure. Since I'm still new to reloading, I still weigh each powder throw prior to dumping it into the case
Hope this helps........
Emilio,
I've worked up some loads with Benchmark for 155 Lapua Scenars but unfortunately have yet to find time to get to the range to try them out. I started out with 43.5 grains of Benchmark and worked my way up to 45.0 grains, in 0.5 grain increments. Once I try them out, I'll post my findings here.
03psd,
As for my other .308 load with Benchmark:
42.0 grains of Benchmark
168gn Sierra Match King HPBT-M (Moly coated)
Lapua Brass with headspace measurement of 1.631"
CCI-BR2 Primer
OAL = 2.800"
5-Shot Grouping: Consistent sub 0.5 MOA at 100 yards
My rifle:
Remy 700 XCR Tactical Long Range (26" barrel)
I've found that the Benchmark powder meters very well in my RCBS Uniflow Powder Measure. Since I'm still new to reloading, I still weigh each powder throw prior to dumping it into the case
Hope this helps........
