20 MOA canted rail raiser for Savage BAT/S-K BAS

[shadowmaker]

I'm trying to match up a 20MOA cant riser solution to mount a Premier 5-25x56mm on a Savage 10 BAT/S-K rail system. Any suggestions? Any feedback on Badger's riser? Is there anyone known to keep them in stock?

Savage's Rail System:

There is about 6.5" of rail to work with on the factory system.

Best combo so far seems to be a Badger rail with a set of low profile Seekins rings.

Badger's 22 MOA forward cant riser rail:

P/N 249-25 Weight 2.9 oz., Length 5 3/8”, Height .430 high

Any suggestions?

 

[deadly0311]

Re: 20 MOA canted rail raiser for Savage BAT/S-K BAS

if you have the 5-25 double turn, there really isnt a need for a 20 MOA base, if the rifle is a 308 you will wont even get to the second turn to get to 1K, just get a set of rings and mount it up

 

[gugubica]

Re: 20 MOA canted rail raiser for Savage BAT/S-K BAS

I run the Badger riser on my AR, its good kit.

Triad should have them in stock.

 

[Dirtracer151]

Re: 20 MOA canted rail raiser for Savage BAT/S-K BAS

+1 for the Badger riser. Works well on my LR-308. As one poster mention though... you shouldn't need it with that scope

 

[shadowmaker]

Re: 20 MOA canted rail raiser for Savage BAT/S-K BAS

Thanks guys!