Im pretty sure I know the answer because I’ve looked and looked, with no luck. But looking for a 20 MOA scope mount with a height taller than 1.54” for an AR set-up.
20 MOA Mount higher than 1.54”???
- Thread starter jrbet83
- Start date
Maybe the Burris Signature XTR rings, their tallest ones. Their offset inserts allow you to actually vary the amount of MOAs and even allow for any offset windage compensation too if needed. In fact they will allow you to optically center your scope to your rifle. Best of all they will never leave any mark or blemish on your scope tube as though you're scope had never been mounted before and never require any lapping and have a lifetime warranty. Typically $70-$80 maybe less when you price shop.
Check out the American Defense Mfg Delta series mounts. They have heights of 1.5”, 1.7”, and 1.9”, 0 and 20 MOA versions, and plenty of other options like cantilever, no cantilever, QD and cross-bolt options.
Just checked. They may not have 20 MOA options taller than 1.5”. But I guess you could always email them and see if there’s anything planned?
Just checked. They may not have 20 MOA options taller than 1.5”. But I guess you could always email them and see if there’s anything planned?
Last edited:
If you don't need it far forward, there's this
seekinsprecision.com
HIT PRECISION MOUNT
HIT PRECISION MOUNT <p>The new S-LOCK® wedge on the NEW Seekins HIT Precision Mount is the answer to a worry-free, slip-proof, fire-and-forget mounting system. The S-LOCK® wedge takes up the spacing between Picatinny rail slots, eliminating any rail
seekinsprecision.com
As another option, what about a 2-part solution? Find some kind of riser or swan rail to get your 20MOA then a normal pair of rings for the rest of the height?
That was the only thing I could think of considering the Seekins mount likely won’t have enough eye relief on a small frame.
Ask stupid questions, get stupid answers. I asked I very specific question, looking for a very specific answer. If you can help, great. If you can’t, that’s fine too. But not interested in getting in a conversation about how 1.54” is “standard” height. Or why I don’t need anything higher that. If I asked for an opinion or advice, that would be different….I didn’t. Having said that, thanks to the productive contributors (xtr rings, Seekins mount or 20moa riser…oh and adm advice). But looks like what I want, isn’t made.
I will say for others in my situation, Steiner’s mount is listed as 1.6”. Not ground breaking taller…but it’s something.
I didn't ask a stupid question. I was geniously curious about the use case. If you wanted to be Mr. Top Secret, you could have said "Id rather not say." Instead you wanted to be "cute." Mission accomplished.
When I needed some extra height so the alien tech in my Predator goggles would line up with my short wave infrared prism scope I stuck with traditional rings mounted on one of these:
Mark AR Rail Mount Matte
The Mark AR Rail Mount is an aluminum one-piece base designed to fit any Picatinny rail and raise your mounting platform. Leupold’s tactical Mark AR family of mounts gets your scope to the right height and eye relief while providing one of the most rock-solid mounting solutions in the business...
www.leupold.com
-Stan
I hesitate to wade in as the OP seems…spicy.
But I found a 1.85” high mount for 34mm tubes here:
www.eurooptic.com
Kicker is that it’s an adjustable MOA base. Not sure if that’s tough enough for whatever you’re doing with that AR.
Just found a 1.89” high 30mm non-adjustable 20MOA mount. Has QR levers:
www.eurooptic.com
I’d check EraTac’s website or catalog if I were you. Eurooptic may not carry all of their stuff.
The other place I’d check is Optics-Trade.eu and use their filters. That’s how I found what I did at Eurooptic.
But I found a 1.85” high mount for 34mm tubes here:
ERATAC Gen 2 Adjustable Inclination Mount 34mm 47mm-1.85" High (required height for SB 5-45) T5064-0030
FREE SHIPPING on ERATAC Gen 2 Adjustable Inclination Mount 34mm 47mm-1.85" High (required height for SB 5-45) T5064-0030
Kicker is that it’s an adjustable MOA base. Not sure if that’s tough enough for whatever you’re doing with that AR.
Just found a 1.89” high 30mm non-adjustable 20MOA mount. Has QR levers:
ERATAC One-Piece Mount 30mm 20 MOA 35mm Safety Levers T1013-2035
ERATAC One-Piece Mount 30mm 20 MOA 35mm Safety Levers T1013-2035 | Only at EuroOptic.com!
I’d check EraTac’s website or catalog if I were you. Eurooptic may not carry all of their stuff.
The other place I’d check is Optics-Trade.eu and use their filters. That’s how I found what I did at Eurooptic.
Similar threads
