I just received a barrel chambered for 22cm and for the barreled action put together. It was a prefit for a Defiance Ruckus action.
I have a set of go/no-go gauges from Manson who also made the reamer. They are the 6.5cm gauges. The bolt does not close on the go gauge with ejector removed. So obviously it does not close on the no-go.
I have some ADG brass (which I only used a mandrel and did not full length size). The bolt does close on the brass, with what I would say slightly more pressure to close than I would expect. I measure the headspace of the brass and the shoulder is not pushed back. Measured with the “C” Hornady comparator.
Maybe slightly tight chamber? Just go with it?
I have a set of go/no-go gauges from Manson who also made the reamer. They are the 6.5cm gauges. The bolt does not close on the go gauge with ejector removed. So obviously it does not close on the no-go.
I have some ADG brass (which I only used a mandrel and did not full length size). The bolt does close on the brass, with what I would say slightly more pressure to close than I would expect. I measure the headspace of the brass and the shoulder is not pushed back. Measured with the “C” Hornady comparator.
Maybe slightly tight chamber? Just go with it?