22 DTI

[AR shooter]

I was sizing Valkyrie brass today and decided to run a 6.8 SPC in the die and necked it to 22. Hell of good looking round. Case capacity should be comparable to the 22 Nosler with a case head that will hold primer pockets together. Have any of you built a 22 DTI? I would only order the barrel.

 

[DLS]

I had one for a couple years. Neat round but really shines with heavier bullets but The longer case makes that difficult thusly 22ARC

 

[knuckleballz]

6hagar necked down to 22=220 thunderbolt. Running 77smk at 3300 with 30 grains of 15.5 mag length in ar15 with no pressure issues on brass.

 

[AR shooter]

6hagar necked down to 22=220 thunderbolt. Running 77smk at 3300 with 30 grains of 15.5 mag length in ar15 with no pressure issues on brass.

I've thought about getting 6 Hagar brass many times to replace the 22 Nosler brass but now it's discontinued so don't need to worry about it. The 22 DTI gets close.

 

[knuckleballz]

luckily I have a couple thousand new 6 hagar brass cases I accumulated so I am set for a long time