**Parting out, Action is Sold**
Will be posting ads for what's left.
This rifle is essentially brand new. Been fired less than 150 rds. Started with Lapua 6.5 brass, necked down. After ladder test I started seating depth and came to 2.080"CBTO, loaded confirmation rounds, then decided to switch to Alpha 25 Creed head stamp. Never fired the loaded rounds.
Once I decided to use Alpha I stopped the Lapua load development. I completed the ladder test w/ Alpha, then loaded seating depth, but never had a chance to shoot them.
Here is a list of the package:
Components:
Will be posting ads for what's left.
This rifle is essentially brand new. Been fired less than 150 rds. Started with Lapua 6.5 brass, necked down. After ladder test I started seating depth and came to 2.080"CBTO, loaded confirmation rounds, then decided to switch to Alpha 25 Creed head stamp. Never fired the loaded rounds.
Once I decided to use Alpha I stopped the Lapua load development. I completed the ladder test w/ Alpha, then loaded seating depth, but never had a chance to shoot them.
Here is a list of the package:
- Foundation Centurion Dark Distress w/ Arca Rail
- Impact Precision 737R Action
- Brux 1:8, MTU, Burnt Bronze, 26", Chambered by Alpha and Omega with JGS 25 Creedmoor Reamer
- EC Tuner Brake
- Huber Concept 2 stage 8oz up 8oz break
- Athlon Eres 4.5-30x 34mm tube, 56mm objective, MKM machine caps, ARD, throw lever, bubble level
- Zeiss scope rings w/ bubble level built in
Components:
- Lapua 6.5 LRP 101 pieces virgin
- Lapua 6.5 SRP 195 pieces condition below:
- 81 pieces, Virgin, sized, trimmed (Henderson)
- 40 pieces virgin, sized, trimmed (Henderson), 41.5gr H4350 (V4 +-.02gr), GM205, Seated 2.085" CBTO
- 34 pieces 1x fired, deprimed, cleaned, annealed (AMP), resized, trimmed (Henderson), primed (CPS) with GM205
- 40 pieces, 1x fired, still in fired state
- Alpha Munitions 398 pieces condition below:
- 200 pieces unopened
- 100 opened but virgin
- 82 pieces trimmed (Henderson), loaded 42.5gr H4350 (2903FPS Magneto V3), at seating depths
- 30 pieces loaded for seating depth 3 rounds of each loaded from 2.081"CBTO-2.105"CBTO in .003" increments.
- 10 pieces loaded to 2.105"CBTO for back up in seating depth test( I test at home, I could size down if needed during test)
- 10 pieces loaded to 2.085"CBTO using Redding .283 bushing on once fired brass (Annealed,size, trim)
- 10 pieces loaded to 2.085"CBTO using Redding .283 bushing virgin brass
- 10 pieces loaded to 2.085"CBTO using SAC .283 bushing virgin brass
- 5 pieces loaded to 2.080-2.085 for fouling
- 7 pieces loaded to 2.085
- 16 pieces in once fired state
- 12 unopened 100 count boxes Berger 135gr Hybrid
- 1 100 count box Berger 135gr Hybrid half full
- 3 100 count box Berger 133gr Hunter unopened
- 1 Redding type S bushing die
- Redding Type S bushing size .282, .283(Titanium)
- SAC Bushing .279, .280, .283
Attachments
Last edited:
