260 remington pet loads

[WNY260]

Hi folks, new guy on here, far from new to shooting. Anyone have any pet loads for 260 Remington? I'm testing with 130gr Berger AR hybrids & Lapua 139 scenars. Thanks!

 

[Steel head]

You should probably look here.
Decade of data.
Oppps

forgot link

http://www.snipershide.com/shooting/threads/260-remington.6252739/

 

[WNY260]

Thank you!

 

[sanpedroranch]

A sleeper powder for me has been AA2700 but slightly temp sensitive here in TX

 

[BoltRunner]

If your still looking for 260 Data hit me up I have tons of speeds, loads, powder, for the 260...

 

[Ab0731]

If your still looking for 260 Data hit me up I have tons of speeds, loads, powder, for the 260...

I am interested in some of your recipes. My current recipe for my 260 is Lapua brass with 42.5 grains of H4350 with a 130 Sierra TGK on top. COAL of 2.860 CBTO 2.258. I measured my chamber throat with a modified case and the same Sierra bullet at 2.877. I’m thinking I should stick it on out? I’m new to the long range game and trying to learn and be the best shooter I can. Rifle is a Savage 12 LRP 26” factory tube. Any insight is greatly appreciated.
-AB

 

[lash]

I probably have already posted it somewhere in the thread that @Steel head linked, but I’ve been using 41.8gr H4350 in Norma/RUAG brass under Lapua 136gr Scenar Ls for 2750-ish FPS for the last couple barrels. It is super consistent for me, though I have tossed around the idea of using Berger 130s a bit lately.

 

[TxWelder35]

Peterson SRP
Cci 450
42.5gr H4350
136gn Lapua Scenar-L
2850fps out of a 26” barrel

 

[KeithR41]

Rem brass, CCI primer. 43.1 gr H4350. 140 Amax.

My max stash is almost gone though so I’ll be switching to the ELD-M.

 

[EN2722]

7.62x51 LC LR brass necked down
42.8 Gr of RL16
CCI primer
Berger 130 Hybrid
26” tube
2920 MV with 5.1 SD’s

 

[rothgyr]

Peterson SRP
CCI 450
44.8 H4350
123 Lapua Scenar
2835 out a Tikka CTR 20" barrel

 

[cruze5]

this is where I started: http://www.hodgdonreloading.com/data/rifle

ended up using IMR 4451, VVN540 are the most accurate in my Tikka CTR
I am using 140 SMK/ Berger though