Rifle Scopes 34mm, 20MOA, 1.4 high rings recommendations

[stradibarrius]

I have a Tikka TAC A1and a Kahles 624i x56 scope. currently I have a cantalever base mount but the current set up will not allow me to get proper eye relief. The mount has wide curved mounting points (rather than straight) that butt against the turret tower. I need a 20 MOA set of rings that are 1.4" high so the 56mm objective will clear the extended rail . The Barrett Zero Gap set seems to be a good fit but they seem to be 0 MOA.
Recommendations Please.

 

[Denys]

You might want to look at the Burris XTR Signature rings. In 34mm, they come in 1.00inch and 1.50inch. With the inserts you can easily set up whatever cant you want. I have a set on my F-TR Match rifle where I have a 30 MOA cant with the rings and the angled base.

 

[Tchitcherine]

Nightforce Ultralite 34mm 1.375" might work for you, available in 4 screw and 6 screw models. Have used these rings, as well a their uni-mounts -- well made, strong, light weight, no problems.

 

[stradibarrius]

The Nightforce ultralite model A357 seems to be the best choice. Others here surely have extended rail guns with 56mm objective bells. I know that Sphur has a solution but at over $400... That is what I have on my TRG. I'll check the Burris. I hope others will chime in.

 

[stradibarrius]

Ordered Burris 1.5" XTR signature rings . They arrived yesterday and I installed them today. It is a pretty slick set up and I was able to install and set the eye relief perfect for me. I know some folks have had some issues but i'm feel that they will work fine...time will tell.