34mm cantilever lpvo mount with 20moa bias and 12 o'clock RDS mount

[gnubag]

Hi everyone,

I'm looking for a 34mm tube 1.54" height cantilever lpvo mount which has 20 moa bias and is capable of mounting a RDS at 12 o'clock. Preferably lightweight, as it is going on a lightweight 555 ar15 with either a Vortex Razor gen3 1-10 or NF ATACR 1-8.

Currently, I found the Badger C1 mounts that checks all the boxes, but wanted to check if there are other mounts that are capable of what I'm looking for.

I know spuhr makes some, but they are just too beefy/heavy for my use.
I really like the seekins mxm mount, but I couldn't find a 12 o'clock RDS mount for it.

Reptilia/Geissele don't have 20 moa on their mounts.
The unity mount is too tall and also does not have 20 moa either.

Anyone got a good lead?
Thanks!

 

[Trigger Monkey]

Do you really need 20 MOA on a 1-10 or 1-8? Both of those optics have 30 mil of internal travel, more than enough to zero on a flat top and they're not really designed for dialing out to distance like a typical long range optic.

 

[S197]

Your desired setup is throwing me off. 20MOA with a LPVO and you want a 12:00 RMR? What are your plans with the rifle?

 

[drewthebrave]

The Burris PEPR in 34mm is only available with 20 MOA cant (no 0 MOA option) and it includes the picatinny top rings. It's no Gucci mount, but it checks your boxes. I run one with a Bushnell DMR II 3.5-21x on my 6.5 Creedmoor AR and it has been rock solid. At 6.9 ounces (nice), it's pretty light too. You'll need an RMR to Picatinny adapter that will raise the RDS well above your turrets - but it seems like that's all the rage these days.

I would probably prefer a 0 MOA mount for an LPVO, but if 20 MOA keeps your optic near mechanical center at the ranges you plan to shoot, more power to you.

 

[Bantam1]

Badger makes one, then you can get the different options for the front cap to mount what you want.

https://www.badgerordnance.com/c-o-m-m-34-mm-1-54-20moa-154-342-342b.html

 

[newguy2k3v2]

Badger c1 is gonna be the best option. The Parker mountain ring caps are really nice and drop the 12 o’clock optic down from the badger setup

 

[ExtremeMemer]

I have a related question. If you are using a Tremor3 reticle is a 20moa mount a good idea? My understanding is that with the Tremor3 you will not be dialing so the 20moa mount is not needed. However, when I asked nightforce they recommended a 20moa mount.

 

[FatBoy]

Badger c1 is gonna be the best option. The Parker mountain ring caps are really nice and drop the 12 o’clock optic down from the badger setup

Holy shit, how did I miss this? I was going to swap mounts to Reptilia as I could not find a top mount solution .

Thank you.

 

[jhern19]

I have a reptilia for sale with rmr cap. 0moa tho

 

[camocorvette]

I have a reptilia for sale with rmr cap. 0moa tho

No sales outside the px. No sales with out a supporter account.

 

[jhern19]

No sales outside the px. No sales with out a supporter account.

My bad.