I'm working up a new 30 caliber wildcat round (more info coming soon) with DBMG for AR-15s and have some Sierra 220 and 240-grain Matchking bullets being sent overnight to me but they won't be arriving until Tuesday due to the weekend.
As we're in a rush due to the need to get reamers ordered I was really hoping someone up here might be able to provide a couple of dimensions on one or hopefully both of these bullets. The dimensions I'm looking for are:
1) distance from the base to the tip
2) distance from the base to the start of the bearing surface (end of the boat tail)
3) distance from the base to the beginning of the ogive
Thanks IMMENSELY for any help folks can provide... we're very eager to get going on the reamer specs!
-Scott (Beartrack)
As we're in a rush due to the need to get reamers ordered I was really hoping someone up here might be able to provide a couple of dimensions on one or hopefully both of these bullets. The dimensions I'm looking for are:
1) distance from the base to the tip
2) distance from the base to the start of the bearing surface (end of the boat tail)
3) distance from the base to the beginning of the ogive
Thanks IMMENSELY for any help folks can provide... we're very eager to get going on the reamer specs!
-Scott (Beartrack)