.408 Cheytac

[SAS_Sniper]

Hi all.. Checking to see if anyone has a recommended loads for 408 ct..
Mine 'll arrive in a few months. I'll use Peterson brass, 398 gr monolithic bullets , N560 (or N570 powder)....and what else....ahm....29" lothar walther barrel (1/13 twist rate)..

Feel free to post your loads for your rifle,..it's nice to learn.

 

[THEIS]

Hi,

What monolithic bullet are you going to be using? Not all monolithics are of the same design and depending on what the design is will change the loading data information.

Sincerely,
THEIS

 

[Starbuck]

In my EDM XM-408 Windrunner I use Lehigh 400gn solids with 128gn RL-25 & Bertram brass. Velocity is around 2775 IIRC. At some point I will upgrade to Peterson brass as the BB is not very uniform.

 

[SAS_Sniper]

Hi,

What monolithic bullet are you going to be using? Not all monolithics are of the same design and depending on what the design is will change the loading data information.

Sincerely,
THEIS

Hi THEIS
i'll use clearwather bullets 419 grains
https://www.clearwaterswissprecision.com/carello-spesa/

or windcut bullets 412 grains
http://windcutbullets.com/home/61-conf-50pz-ogiva-t-cal-0408-412gr.html