Gunsmithing 40X trigger????

[jvm]

I found a Remington 700 trigger in a box of gooides. It is different in that it has 2 extra pins at therear and also a small spring insdie the body that goes through the lower pin.

is this a 40X tigger? Thanks

 

[Turk]

Re: 40X trigger????

Is there a screw going upwards?

 

[Kells81]

Re: 40X trigger????

Is the a screw in front of the trigger shoe that can be adjusted while it is in the stock?

Like this

 

[wirehand]

Re: 40X trigger????

here is a couple of diagrams of 40x triggers in this thread.
http://milsurpshooter.net/topic/6936/t/Remington-40X-trigger-adjustment-pics-and-instructions.html

 

[jvm]

Re: 40X trigger????

After looking at the pics in wirehand's site I still don't know what I have!!! There is no extrenal adjusting screw while in the stock.

On the left side (trigger facing the muzzle) above the safety hole there are 2 extra holes smaller in diamter. The upper hole captures a "P" shaped part. The bottom hole captures a spring that pushes this "P" upwards. I think this could be a thrid lever??

Thanks for your help guys.

It appears there would be no room in the housing for a safety as the spring and the "P" take up this space.

The 3 adjusting scres on the body are flat screw driver headless.
The trigger appears to be a Remington

 

[Kells81]

Re: 40X trigger????

You could always post pics, I bet someone here knows what ya have

 

[SCOTTx88]

Re: 40X trigger????

Here's one of my 40X triggers.

This is a Remington M24 Trigger.

 

[tspearsrph]

Re: 40X trigger????


no bolt stop on M-24?

tom

 

[jvm]

Re: 40X trigger????

Thanks for your pics. I am too computer iliterate to post.

 

[Dans40X]

Re: 40X trigger????

The trigger group that you have is the 3 lever 2oz trigger,that is installed on the single shot rifles.

 

[SCOTTx88]

Re: 40X trigger????

We were fixing the bolt stop,they sheared off the pin. (un-named Northern Va. Agency)