6.5 Grendel headspace question

[Mschloss]

I just assembled my Grendel from scratch. Bolt and barrel came as a package. Just to be sure, I have checked the headspace anyway and have a question. After removing the extractor (pain in the ass), the bolt closes easily on the go gauge. However, it will also close on the no-go with a little bit of pressure on the bolt.

Based on this, are there any safety concerns? Why would a bolt/barrel combo not be headspaced correctly? Thanks for any input in advance...

 

[jasonZ]

Re: 6.5 Grendel headspace question

To the best of my knowledge, u should not force your bolt closed on a gauge. if it closes by itself. then that is different. I think your ok there

 

[Mschloss]

Re: 6.5 Grendel headspace question

Thanks for your quick response. I feel my situation is safe, but wanted to run it by the experts.

 

[Mike_in_FL]

Re: 6.5 Grendel headspace question

Even with a bolt gun it's acceptable if it closes on the no go. If it closes on the field is when you're in trouble.

 

[jasonZ]

Re: 6.5 Grendel headspace question

LOL I'm no expert so that's out the window, but generally your bolt should go almost closed, as with a bolt gun, but just not all the way with a no go. Bolt guns are tighter and I would not force a bolt gun as it is said that it can cause damage. I think your ok though.

 

[Unknown]

Re: 6.5 Grendel headspace question

Welcome to the Grendel world, you will love 'em. I have had 3 of them, down to just two of them now.